Development and conceptual design of a sewage Sludge-to-Fuel hybrid Process: Prediction and optimization under analysis of variance and response surface model
Hong Tian,Meiyun Geng,Xiaotang Wo,Lei Shi,Ying Zhai,Peng Ji
DOI: https://doi.org/10.1016/j.enconman.2024.118143
IF: 10.4
2024-04-01
Energy Conversion and Management
Abstract:Nowadays, due to the increase in urban population and industrial activities, the content of sewage sludge coming out of wastewater treatment processes is growing rapidly. The correct management of sewage sludge can be a promising and fruitful approach to achieve a sustainable society and environment. This article aims to propose and evaluate a hybrid sewage sludge-to-combustible fuel (containing hydrogen) conversion process. The main structure of the offered hybrid sewage sludge-to-fuel (SStF) process is designed under the three processes of pyrolysis, hydrothermal carbonization, and steam reforming. Five items of concentrations of output hydrogen and tar, gas yield, energetic efficiency, and lower heating value (LHV) were evaluated and discussed as critical parameters under different design conditions through parametric analysis. In addition, multiple linear regression Equations were developed to predict the aforementioned parameters. Further, analysis of variance was performed to identify the synergistic impacts of decision variables. Finally, the optimized design conditions and outputs of the offered hybrid SStF process were determined under a multi-objective optimization based on the response surface model. The developed structure and methodological in this article for the hybrid SStF process is a novel that had not been observed in previous reports. From the outcomes, to reduce tar formation, it is better to set the working temperatures of the hydrothermal carbonization and pyrolysis processes in higher and lower values, respectively. Moreover, under optimum working conditions of (hydrothermal carbonization process temperature and duration of 182 °C and 1.08 h, steam flow rate value of 7.02 g/s, and steam reforming and pyrolysis processes temperatures of 982.1 and 589.2 °C), a maximum hydrogen rate of around 58.43 vol%, maximum LHV value of 11.4 MJ.N-1m−3, maximum yield of gas of 1.16 Nm3.kg−1, and minimum tar output rate of 4.64 g.N-1m−3 under a desirability of 0.795 can be achieved. The superior performance achievable through the proposed hybrid SStF process is competitive compared to similar technologies in the literature. Therefore, the present study could provide an alternative structure for SStF or energy processes.
energy & fuels,thermodynamics,mechanics