Abstract:The effects of sludge content and pyrolysis temperature on the pyrolysis process and product properties were studied through the co-pyrolysis of sludge and cotton stalk. Multi-objective fuzzy hierarchical analysis was used to analyze the multiphase properties of pyrolysis products, and describe the internal relationship between pyrolysis conditions and product properties. It has been proved using kinetic calculation that the mass ratio of sludge and cotton stalk is higher than 1:2 required the lower pyrolysis activation energy. According to the comparison between experimental and theoretical results, the addition of sludge is beneficial to increase the bio-oil yield. In terms of product performance, the addition of sludge and increase of pyrolysis temperature both can improve the specific surface area, pore volume of biochar and the pH value of bio-oil, reduce the total acid content, increase the total phenol content and optimize calorific value of bio-oil. The specific surface area of biochar, calorific value of bio-oil, total phenol content and pH were evaluated by multi-objective decision analysis method, the optimum process condition of sludge: cotton stalk = 2:1 at 600 °C. Under the conditions, the specific surface area of biochar is 57.40 m 2 /g, the pH of the bio-oil is 8.06, the total acid content is 5.94 mg/g, the calorific value is 27.18 KJ/g and the total phenol content is 47.32 mg/g, respectively. Compared to the pyrolysis product of cotton stalks, the specific surface area is increased almost 20 times, the calorific value is increased by 13%, the total acid content is decreased by 95%, and the total phenol content is similar. This study proposed a preparation process of bio-oil with high performance, and provided a theoretical basis for the subsequent co-pyrolysis research.

Influencing factors and product property of low temperature pyrolysis of oil sludge

Effects of Temperature on Pyrolysis Products of Oil Sludge

Pyrolysis properties of oil sludge

Low Temperature Pyrolysis Characteristics of Oil Sludge under Various Heating Conditions

Components of Oil Sludge and Their Influence on Pyrolysis Behaviors

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

Research on combustion characteristics of bio-oil from sewage sludge

Investigation of pyrolytic characteristics of three oily sludges with focus on properties of oil product

Evaluation of pyrolysis residue of oil sludge for recycling as bed material

Slow pyrolysis characteristics of petroleum sludge

Pyrolysis Characteristics and Products Distribution of Petroleum Sludges

Researches on The Low-temperature Catalyst Pyrolysis of Sewage Sludge

Progress in Thermal Analysis Studies on the Pyrolysis Process of Oil Sludge

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Pyrolysis characteristics and product distribution of oil sludge based on radiant heating

Lab-scale Pyrolysis of Oil Sludge in Continuous Rotating Reactor:Mass/energy Balance and Product Analysis

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Co-pyrolysis behaviors, kinetics, and thermodynamics of sludge, lignite and biomass through fixed-bed reactor experiments and thermogravimetric analysis

Petroleum oil and products recovery from oily sludge: Characterization and analysis of pyrolysis products