Abstract:It is essential to characterize the in-plane thermal conductivity of polymer materials accurately in many applications. Although there exist a few appropriate steady and transient characterizing techniques to accomplish the task, the methods often require complicated micro-fabrication, calibration or additional property determination procedures (e.g., some transient approaches only yield in-plane thermal diffusivity. Thus the volumetric heat capacity CV needs to be measured independently in order to calculate the thermal conductivity.). In this work, we have employed a membrane-based modified Ångström (MMA) method to directly measure the in-plane thermal conductivity of several micrometer thick polymer materials. The suspended polymer membranes are patterned with double metal strips made by simple shadow mask deposition. The metal strips are used to create periodical Joule heating and to perform temperature sensing. The measurement of the in-plane thermal conductivity is carried out without requiring the knowledge of the CV value. The accuracy of the approach has been verified by numerical calculations. The measured thermal conductivities for poly(tetrafluoroethylene) (PTFE) and polyimide (PI) samples were found to be comparable with available literature values. Since the in-plane thermal diffusivity of the membrane can be obtained simultaneously, its reliability was also evaluated. Moreover, the possibilities of applying the MMA method to other materials (e.g., high thermal conductivity membrane) have been discussed. This study suggests that the MMA method coupled with shadow-masking technique may offer a straightforward and reliable way of measuring the in-plane thermal conductivity of several micrometer thick free-standing membranes.

Measurements of the thermal conductivity and thermal diffusivity of polymers

Transient Thermal Characterization of Micro/Submicroscale Polyacrylonitrile Wires

Thermal Characterization of Microscale Conductive and Nonconductive Wires Using Transient Electrothermal Technique

Thermal conductivity determination of small polymer samples by differential scanning calorimetry

Thermal conductivity measurement of polymers with an improved 3ω method

Measuring in-plane thermal conductivity of polymers using a membrane-based modified Ångström method

A Noncontact Method for Measuring Thermal Conductivity and Thermal Diffusivity of Anisotropic Materials

New Measurements of the Thermal Conductivity of PMMA, BK7, and Pyrex 7740 up to 450K

A Steady-State Short-Hot-Wire Method For Measurement Of Thermal Conductivity Of A Single Carbon Fiber

Short Hot Wire Technique for Measuring Thermal Conductivity and Thermal Diffusivity of Various Materials

Thermal Diffusivity Measurement in Through-Thickness Direction of Dielectric Film With Metal Substrate

Measurements of thermal conductivity and thermal diffusivity of alternative refrigerants in liquid phase with a transient short-hot-wire method

Thermal Conductivities of Nylon Thin Films Measured by ISO 11357-8 Method

Numerical Study of the Influence of Thermal Radiation on Measuring Semi-Transparent Thermal Insulation Material with Hot Wire Method

Measurements of Thermal Conductivity and Electrical Conductivity of a Single Carbon Fiber

Advances in study of thermal-conductive polymers

Novel, Cost Effective, and Reliable Method for Thermal Conductivity Measurement

Simultaneous Measurements of the Thermal Conductivity and Thermal Diffusivity of Molten Salts with a Transient Short-Hot-Wire Method

A novel method for simultaneous measurements of the intrinsic thermal conductivity and thermal diffusivity of individual fibers

Research Progress of Thermal Conductivity Enhance of Polymers

Thermal Conductivity of Polyisoprene and Polybutadiene from Molecular Dynamics Simulations and Transient Measurements