Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct Metallization of Teflon-based Printed Circuit Boards

Research on Applying Direct Plating to Additive Process for Printed Circuit Board

Direct writing patterns for electroless plated copper thin film on plastic substrates

Directly Electroplated Metallization on Flexible Substrates Based on Silver Nanowire Conductive Composite for Wearable Electronics

Additive Preparation of Conductive Circuit Based on Template Transfer Process Using a Reusable Photoresist

Metallization of a LTCC substrate by electroless copper plating

PET Surface Modification with Inkjet-Printing Pd 2+ /Epoxy Resin Solution for Selective Electroless Copper Plating

Direct electroless plating of conductive thermoplastics for selective metallization of 3D printed parts

Additive Fabrication of Conductive Patterns by A Template Transfer Process Based on Benzotriazole Adsorption As A Separation Layer

Enhancing peel strength between liquid crystal polymer and copper with plasma treatment, surface oxidation, and silane coating

Sustainable direct metallization of 3D-printed metal-infused polymer parts: a novel green approach to direct copper electroless plating

Drop-on-demand printing of recyclable circuits by partially embedding molten metal droplets in plastic substrates

Design of metalized polyether-ether-ether-ketone based on semi-additive manufacture for 5G applications: from bottom-up assembly to selective electroplating

A facile process to fabricate electroless plating on PET sheet: Effects of surface roughness on adhesive force, electronic and structural properties of copper coating

Optimizing Manufacturing Process of Printed Electronics

Solution-based, additive fabrication of flush metal conductors in plastic substrates by printing and plating in two-level capillary channels

Fabrication of Double-Sided FPC by Hydrolyzing-Doping-Plating Additive Process

Selective metallization on additive manufactured polymer for fabrication of integrated device

Surface metallization of PTFE and PTFE composites by ion implantation for low-background electronic substrates in rare-event detection experiments

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

A High Copper Concentration Copper-Quadrol Complex Electroless Solution for Chip Bonding Applications