Abstract:Abstract Jointed interfaces, damage, wear, or non-idealized boundary conditions often introduce nonlinear characteristics to assembled structures. Consequently, extensive research has been carried out regarding nonlinear system identification. The development of nonlinear system identification is also enabling the intentional application of nonlinearities towards practical fields such as vibration control and energy harvesting. This research proposes a nonlinear identification procedure that consists of two steps: first, the raw data is filtered by the Double Reverse Multimodal Decomposition method that involves system reconstruction, expansion, and filtering twice. Second, the Peak Finding and Fitting method is applied to the filtered signal to extract the instantaneous amplitude and frequency. The identification procedure is applied to the measured responses from a jointed structure to assess its efficacy. The results are compared with those obtained from other well-known methods—the Hilbert transform and zero-crossing methods. The comparison results indicate that the Peaking Finding and Fitting method extracts the amplitude of the response signal more accurately. Consequently, this yields a higher signal-to-noise ratio in the extracted damping values. As a recommended last step, uncertainty assessment is conducted to calculate the 95% confidence intervals of the nonlinear properties of the system.

Damping Identification of Materials Using Wavelet Transform

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Study of Damping Ratio Identification for a Truss Spar Based on Continuous Wavelet Transform

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

A Method for Material Damping Measurement

Damping Ratio Identification Using A Continuous Wavelet Transform to Vortex-Induced Motion of A Truss Spar

Identification of Modal Parameters of A System with High Damping and Closely Spaced Modes by Combining Continuous Wavelet Transform with Pattern Search

Natural Frequencies and Damping Estimation Based on Continuous Wavelet Transform

Modal Parameter Identification Using Wavelet Transform Method

Identifying damping ratio of cable structures using complex wavelet transform

IDENTIFICATION OF A NON-LINEAR SYSTEM USING WAVELET TRANSFORMATION

Simulation Contrast of Wavelet Transform and Empirical Mode Decomposition in Damping Identification

IDENTIFICATION METHOD OF DYNAMIC NATURAL FREQUENCIES AND DAMPING FOR LARGE-SCALE STRUCTURE

Identification of Instantaneous Frequency and Damping From Transient Decay Data

Damping Identification in Frequency Domain Using Integral Method

A new damping ratio identification method based on pattern search

Damping identification for stiffness-nonlinearity structures

PARAMETER IDENTIFICATION OF NONLINEAR VIBRATION SYSTEMS BASED ON THE HILBERT-HUANG TRANSFORM

Damping Identification for the Nonlinear Stiffness Structure

Estimating System Damping for a Hard Coating Composite Structure Based on Envelope of a Free Damped Vibration Signal

Estimation and Precision Analysis for Damping Factor of Bellows