Abstract:The experimental results proved that a liquid and commercial chelating agent (DTCR) with dithiocarbamate (DTC) groups could be used to further remove toxic metal ions from the simulated metallic mine wastewater with trace amount of mixed metal ions. Under the optimized operating conditions, just a little dosage of DTCR (the volume ratio of DTCR to wastewater about 1: 104) could make the removal rate of Cr3+, Cu2+, Pb2+, Zn2+ and Cd2+ in the treated water reach 99.70%, 99.28%, 99.10%, 92.33% and 91.49%, respectively. The residual content of the five ions were 0.003, 0.036, 0.009, 0.383 and 0.085 mg/L, which were all obviously lower than the contents required in the emission standard except of Zn2+ and Cd2+. The removal ability followed the order of Cr3+> Cu2+> Pb2+> Zn2+> Cd2+. The characterization revealed that the major functional groups in DTCR were DTC groups (-NCS2) and amino groups (-NH-, -NH2 or -NR2) which were not on DTC groups. The removal mechanisms of these functional groups were investigated by the combination of experimental methods and density functional theory (DFT) calculation, which demonstrated that all the five metal ions could be captured by the metal-ligand bonds between ions and C=S/C-S on DTC groups. But Cr3+, Cu2+ and Pb2+ could be further captured by the electron donation of N atom on -NH2 and -NH- which were not on DTC groups. Moreover, Cr3+ could be further adsorbed by the secondary N atom on DTC group. The relation between the functional groups and metal ions could be calculated quantitatively based on the removal mechanisms. It could well explain the removal ability of DTCR for different metal ions and provide a scientific guideline for the further modification of chelating agent with DTC groups to improve its removal efficiency for Zn2+ and Cd2+ in the depth treatment of wastewater with trace amount of mixed toxic metal ions.

Comparative Studies on Chemical Modification by Diethyldithiocarbamate for ETV-ICP-OES and ETAAS Determination of Chromium and Nickel

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Improved electrochemical performance of trivalent-chrome coating on Al 6063 alloy via urea and thiourea addition

Optimization and validation of a procedure for the determination of total chromium in postmortem material by ETAAS

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry

Nitrite Interference and Elimination in Diphenylcarbazide (DPCI) Spectrophotometric Determination of Hexavalent Chromium.

An Insight into Properties and Mechanisms of a Dithiocarbamate Chelating Agent for the Removal of Toxic Metal Ions from Metallic Mine Wastewater

Determination of chromium by electrothermal atomic absorption spectrometry after rapid microwave-assisted digestion of sediment and botanical samples

Metal speciation by coupled in situ graphite furnace electrodeposition and electrothermal atomic absorption spectrometry

Estimation of Toxic Hexavalent Chromium (Cr6+) in Metal Components Present in Electronic and Electrical Materials with or without using Coordinating Ligands

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Deep eutectic solvent decomposition-based microextraction for chromium determination in aqueous environments by atomic absorption spectrometry with electrothermal atomization

Comparative study of pretreatment methods for the determination of metals in atmospheric aerosol by electrothermal atomic absorption spectrometry

Use of a furnace with a graphite filter for electrothermal atomic absorption spectrometry

Comparative efficacy of platinum group metal modifiers in electrothermal atomic absorption spectrometry

Studies on the stripping voltammetric determination and speciation of chromium at a rotating-disc bismuth film electrode

Development of Solid Phase Extraction Method Based on Ion Imprinted Polymer for Determination of Cr(III) Ions by ETAAS in Waters

Atomic Absorption Determination of Lead, Bismuth, Selenium, Tellurium, Thallium and Tin in Complex Alloys Using Direct Atomization from Metal Chips in the Graphite Furnace

Mesoscopic quantitative chemical analyses using STEM-EDX in current and next generation polycrystalline Ni-based superalloys

Determination of Pt in biological samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) with electrothermal vaporization (ETV)

Determination of Cr, Ni, Cu, Mn, P, Si, Mo and Ti in High Chromium Cast Iron by Inductively Coupled Plasma Atomic Emission Spectrometry