Abstract:This paper presents a mathematical model developed for an electrostatically levitated micromotor in which the ring-shaped rotor is levitated by electrostatic force in five degrees of freedom (DOFs). A glass/silicon/glass sandwich structure is utilized in this electrostatic micromotor, which is based on the technology of micro-electro-mechanical systems (MEMS). In the center of ring-shaped cavity formed by ICP between the top and bottom glass plates, the rotor is levitated by the five DOFs position servo system and driven by speed control system. In this paper, the mathematical model for the motion control of the rotor in five DOFs is developed. This model describes the capacitances and electrostatic forces between the rotor and associated electrodes, and moments of two rotations about the x, y-axis. The rotational torque model governing the rotor's rotational speed is also described. In order to obtain the analytical nonlinear models for error analysis, these integral equations are expanded using the Taylor's series. Moreover the finite element model and its simulation results are obtained by using ANSYS. In terms of comparison between the simulated results and the nonlinear models, the modeling accuracy of the micromotor can be evaluated. Furthermore, the error characteristics of the linearized models via rotor displacement are analyzed. Thus, position sensing and control of both the rotor's motion, and the rotational speed, can be achieved based on these linearized models of electrostatically levitated micromotors. Copyright © 2007 by ASME.

Electrostatic Micromotor and Its Reliability

RESEARCH ON PULL-IN AND RELEASE PHENOMENON OF ELECTROSTATIC MICROPUMPS

Contact Dynamics Between the Rotor and Bearing Hub in an Electrostatic Micromotor

Macro modeling method for electrostatic-drive silicon diaphragm

Advantages of Electrostatic Micromotor and Its Application to Medical Instruments

Research on Permanent Magnet linear Synchronous Motors Driver for Micro-fabrication

Micro-rotor Dynamics for Micro-Electro-mechanical Systems (MEMS)

Stability, Nonlinearity and Reliability of Electrostatically Actuated MEMS Devices

Modeling and Analysis of A Micromotor with an Electrostatically Levitated Rotor

Design and Simulation of an Active Electrostatic Bearing for MEMS Micromotors

Simulation Analysis and Experimental Study of the Diamagnetically Levitated Electrostatic Micromotor

Numerical and experimental investigations on the influence factors of diamagnetic levitated electrostatic motor

MEMS Reliability Review

Modeling of an electrostatic micromotor based on a levitated rotor

An Overview of Reliability and Failure Mode Analysis of Microelectromechanical Systems (MEMS)

Silicon-based micro electrostatic motors

Contact Analysis of the Rotor in A Variable Capacitance Micro-Motor

Survey on MEMS Micromotor

Friction and Wear Study of the Hemispherical Rotor Bushing in a Variable Capacitance Micromotor

Scaling Analysis and Its Applications of Electrostatic Micromotors

Rotation Control and Characterization of High-Speed Variable-Capacitance Micromotor Supported on Electrostatic Bearing.