Abstract:The development of physical modeling for mega engineering prototypes requires sophisticated use of the capability of current centrifuge facilities. In this study, centrifuge model tests were performed to investigate the dynamic response of high fill slope by using generalized scaling law in an improved way. Firstly the two-stage generalized scaling law was partly re-organized by considering the separate similitude of dynamic strain for the virtual 1 g field, to solve the inherent problem of the scaling of soil strain when the derived prototype strain exceeded some important thresholds. Then a series of centrifuge model tests were conducted under different centrifugal accelerations to model a high fill slope with a prototype height of 100 m by the approach of "modeling of models". Dynamic responses under sine waves with different amplitudes were monitored and the re-organized generalized scaling law was validated for nonlinear dynamic response with shear strain less than 1%. It was observed that site amplification of high fill slope was affected by both soil nonlinearity and soil strata non-uniformity, where soil nonlinearity led to smaller acceleration amplification under stronger excitation and soil strata non-uniformity contributed to the acceleration de-amplification and larger displacement amplification at the weak sublayer. The large dynamic displacement near the slope surface consequently contributes to the development of lateral cracks after strong shaking. Seismic response under earthquake motions revealed that high fill slope with inclined non-uniform strata was characterized by multiple vibration modes and lower fundamental frequency, which was more vulnerable to earthquake motions with abundant frequency components. This study provides a more physically meaningful use of the similitude of dynamic stress-strain relation in centrifuge modeling for large-scale geotechnical problems under dynamic loadings.

Application of dynamic centrifuge model test to slope engineering

THE DYNAMIC CENTRIFUGE MODEL TEST IN GEOTECHNICAL ENGINEERING

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions

Centrifuge Modeling of a Dry Sandy Slope Response to Earthquake Loading

Centrifuge Modeling of Dynamic Response of High Fill Slope by Using Generalized Scaling Law

Centrifuge Model Tests on Excavation-Induced Failure of Slopes

Study Of Stress And Displacement Fields In Centrifuge Modeling Of Slope Progressive Failure

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Dynamic centrifuge tests on the synergistic mechanism of pile-anchor structure retaining rock slopes

Centrifuge Model Test on Excavation-Induced Failure of Soil Slopes Overlying Bedrock

Centrifuge Modeling of Soil Slopes with Dual Structure Under Drawdown Conditions

Development and Application of a Slope Excavation Device for Centrifugal Model Tests

Centrifuge model test on failure of soil slope under drawdown of water level

CENTRIFUGE MODEL TESTS ON A COHESIVE SOIL SLOPE UNDER EXCAVATION CONDITIONS

Dynamic Centrifuge Model Tests on an Unconfined Soil Foundation

Dynamic Centrifuge Modeling of Piles-Reinforced Slope on Saturated Sandy Foundation

Centrifuge Modeling of Drying–Wetting Cycle Effect on Soil Slopes

Experimental Study on Centrifuge Model Dynamic Behavior of Slopes with Saturated Subgrades During Earthquakes

Effects of Extreme Drought-Rainfall on Slope Failure Mechanisms: Centrifuge Modelling

Study on Deformation and Failure of Slopes under Coupled Application of Water Level Change and Vertical Load

Centrifuge Modeling of Dynamic Behavior of Pile-Reinforced Slopes During Earthquakes