Abstract:Piles are generally an effective way to reduce the risk of slope failure. However, previous approaches for slope stability analysis did not consider the effect of the piles coupled with the decrease of the water level（drawdown）. In this study, a series of centrifuge model tests was performed to understand the deformation and failure characteristics of slopes reinforced with various pile layouts. In the centrifuge model tests, the pile-reinforced slopes exhibited two typical failure modes under drawdown conditions:across-pile failure and through-pile failure. In the through-pile slope failure, a discontinuous slip surface was observed, implying that the assumption of the slip surface in previous stability analysis methods was unreasonable. The test results showed that drawdown led to instability of the piles in cohesive soil, as the saturated cohesive soil failed to provide sufficient constraint for piles. The slope exhibited progressive failure, from top to bottom, during drawdown. The deformation of the piles was reduced by increasing the embedment depth and row number of piles. In addition, the deformation of soils outside the piles was influenced by the piles and showed a similar distribution shape as the piles, and the similarity degree weakened as the distance from the piles increased. This study also found that the failure mechanism of unreinforced and pile-reinforced slopes induced by drawdown could be described by coupling between the deformation localization and local failure, and it revealed that pile-reinforced slopes could reduce slope deformation localization during drawdown.

Centrifuge Modeling of Soil Slopes with Dual Structure Under Drawdown Conditions

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

Centrifuge model test on failure of soil slope under drawdown of water level

Progressive Failure Behavior of Cohesive Soil Slopes under Water Drawdown Conditions

Centrifuge Modeling of Drying–Wetting Cycle Effect on Soil Slopes

On the Soil Slope Failure Mechanism Considering the Mutual Effect of Bedrock and Drawdown

Centrifuge Modeling of Rainfall-Induced Failure Process of Soil Slope

Centrifuge Model Tests on Pile-Reinforced Slopes Subjected to Drawdown

Centrifuge Modeling of the Progressive Failure of A Soil Slope under Cyclic Loading Conditions

Effects of Extreme Drought-Rainfall on Slope Failure Mechanisms: Centrifuge Modelling

Centrifuge Modeling Of Progressive Failure Of Soil Slope

Centrifuge Modeling of Rainfall-Induced Deformation of Slopes with Weak Layers

Centrifugal Model Tests on Failure of Silty Slopes Induced by Change of Water Level

Study on Deformation and Failure of Slopes under Coupled Application of Water Level Change and Vertical Load

Centrifuge Model Tests on Ecologically Reinforced Soil Slopes Under Vertical Loading

Centrifuge Modeling of Plant Root Reinforcement on Slopes under Drawdown Conditions

Centrifuge Modelling of Clay Slope with Montmorillonite Weak Layer under Rainfall Conditions

Centrifuge Model Test on Excavation-Induced Failure of Soil Slopes Overlying Bedrock

Centrifuge Model Test Study of Structuralized Cemented Slopes under Excavation Conditions

Centrifuge Modeling of the Geotextile Reinforced Slope Subject to Drawdown

Centrifuge modeling of intact clayey loess slope by rainfall