Abstract:Ultrasonic emulsification has received great attention recently due to the great potential of tuning the emulsion droplets size compared to the traditional homogeneous mixing method. In this study, a series of polymeric emulsions were prepared by ultrasonic emulsification approaches. The relationships between ultrasonic power, emulsion destabilization mechanism and structure morphology of macroporous polymer material were studied. The water in toluene emulsion was prepared by mixing the polymer POSS-(PMMA)(8) toluene solution (10 mg.mL(-1)) and water or Na2CO3 aqueous solution (0.1 mol.L-1) through different ultrasonic powers. The volume ratio of water/toluene was remained as 50 : 50. The evolution of emulsion droplets diameter distribution over time was analyzed based on optical microscopy data. The initial droplets diameter increased with the increase of ultrasonic power, and all emulsion droplets diameter distributions followed the diauxie curve. By changing the ion concentration in aqueous solution, excellent monodisperse emulsions with droplets diameter around 10 microns were acquired. It was found out that flocculation degree of emulsions prepared with Na2CO3 aqueous solution was increased with increasing of ultrasonic power. The relationship between ultrasonic power and emulsion stability was clarified by fitting the emulsion droplets diameter variation as the function of time. When ultrasonic power was below 750 W, Ostwald ripening dominated the instability mechanism of emulsion. Once the ultrasonic power achieved to 1000 W, the instability mechanism of emulsion was attributed to Ostwald ripening and coalescence at the same time. The macroporous polymer materials with adjustable pore diameter were prepared by dipping the glass fiber into salt containing emulsions. In this approach, POSS-(PMMA)(8) not only acted as emulsifier during emulsion preparation, but also treated as the skeleton of porous materials. The droplet-size of emulsions was monitored by changing ultrasonic power, meanwhile the structure and morphology of porous materials could be controlled on the basis of emulsion template.

Application Research Evolution of Ultrasonic Technology in Fabrication of Polymers

Progress Of Polymer Reaction Engineering Research In China

Polymer product engineering: an emerging discipline of chemical engineering for high performance polymer materials

New Progress in Applied Research of Silk protein biopolymer materials

Progress in Application of Ultrasonic Technique in Determination of Polymer Structure and Property

ADVANCE IN RESEARCH FOR THE EFFECT OF THE ULTRASONIC FIELD ON THE PROCESSING OF POLYMER

ADVANCES IN SUPERCRITICAL POLYMERIZATION OF OLEFINS--(Ⅰ) POLYMERIZATION PROCESSES AND INDUSTRIAL APPLICATIONS

Application of Ultrasonic Technology in the Enzyme Pretreatment of PLA Fabric

Ultrasonic dyeing of polylatic acid blended fabric

The Application of the Ultrasonic Technology in the Chemical Production

Modulation Mechanisms of Polymeric Emulsion Stability and Porous Material Architecture Within Ultrasonic Fields

Application of Supercritical Fluids in Reduction of Residual Monomer and Volatile Organic Compounds in Polymers

Research on enzyme pretreatment of polylactic acid/cotton blended fabric under ultrasonic wave

Applications of Supercritical Fluid Technology in Polymer Processing

ADVANCES IN ULTRASONICALLY INITIATED EMULSION POLYMERIZATION

The application of Fields to Polymer Processing

Current and Future Trends for Polymer Micro/nano Processing in Industrial Applications

Microwave Technology Based Polymer Process

Application and Development of Ultrasound in Chemical Industry

Research Progress in Mass Transfer Enhancement by Ultrasonic Field

Application of Ultrasonic Technologies in Catalytic Chemistry