Abstract:Introduction. The problem of parametric identification of a mathematical model of the process of cooling and solidification of continuously cast slabs in the secondary cooling zone (SZZ) of continuous casting machines (CCMs) is considered. The relevance of the work is determined, first of all, by the fact that the quality of the product obtained in this way significantly depends on the operating mode of the air defense system. The technological process is quite complex, not fully studied and, as a result, still poorly managed. Purpose of the study. Develop a procedure for parametric identification of a model of the metal cooling and solidification process based on data available for direct measurement. Materials and methods. An analysis and synthesis of literature data on the problem was carried out. An acceptable structure of the mathematical model was determined, a criterion for the proximity of the object and the model was selected, and the problem of its parametric identification was posed and solved. Results. An acceptable formula has been determined to describe the real temperature field in the workpiece after the metal leaves the mold. A numerical study has established that the identification problem under consideration is solved stably and with almost any predetermined accuracy, and an increase in the number of surface temperature measurement points significantly increases the noise immunity of the solution. When describing external heat transfer in radiative-convective form, the identification problem was solved using a program that implements the coordinate descent method; the resulting one-dimensional minimization problems were solved using a subroutine using the golden section method. To numerically integrate the model equations, an implicit finite-difference scheme was used, which was solved by the sweep method. In the case where the external heat transfer of the workpiece is described only in convective form, a program using the golden section method has been developed and tested. The curves of changes over time of process variables calculated using the adjusted model are presented. Conclusion. A mathematical model tuned to the “real process” was used to identify the features of the metal cooling process in the production plant of the continuous casting plant of PJSC MMK; in particular, based on the results of the study, the coolant costs along the production line were adjusted.

Constitution of Control Model for Electro-slag Remelting Process

The Estimation and Control of the Electroslag Remelting Melt Rate by Mechanism-Based Modeling

Modelling of Blast Furnace Ironmaking Process Based on Digital Twin

A Class of Time-varying Models for a Kind of Industrial Process and Its Control Methodology

Class of time-varying models for a kind of industrial process and its control methodology

Consistent Optimization of Blast Furnace Ironmaking Process Based on Controllability Assurance Soft Sensor Modeling.

Improvement of Consarc ESR Furnace Control System

Mathematical model for design of optimized multi-component slag for electroslag remelting

Self-organizing Fuzzy Controller for the Molten Steel Level Control of a Twin-Roll Strip Casting Process

A Mechanistic Model Based on Statistics for the Prediction of a Converter's End-Point Molten Steel Temperature

System Identification for Robust Control of an Electrode Positioning System of an Industrial Electric Arc Melting Furnace

Design of Subspace Predictive Controller in Scrap Copper Smelting

Adaptive neural network controller for the molten steel level control of strip casting processes

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process

Kinetic study of control of alloy elements during electroslag remelting of Incoloy825

Hybrid Adaptive Fuzzy and Neural Network Controller for the Molten Steel Level Control in Strip Casting Processes.

Parameter optimal identification and dynamic behavior analysis of nonlinear model for the solution purification process of zinc hydrometallurgy

Subspace method for identification and control of blast furnace ironmaking process

MODELING AND IDENTIFICATION OF THE COOLING AND SOLIDIFICATION PROCESS CONTINUOUSLY CAST SLAB BILLETS