Abstract:Electro-slag refining process is widely employed in steel industry for the production of special alloys used in ocean, aeronautics, and nuclear industries. Because of the adverse effect on the ductility of metal, it is critical to remove oxygen in the process. This study established a transient three-dimensional (3D) coupled mathematical model for understanding oxygen transport behavior in the electro-slag refining process. The finite volume method was invoked to simultaneously solve mass, momentum, energy, and species conservation equations. Using the magnetic potential vector, Maxwell’s equations were solved, during which the obtained Joule heating and Lorentz force were coupled with the energy and momentum equations, respectively. The movement of metal–slag interface was described through the application of the volume of fluid (VOF) technique. Additionally, an auxiliary metallurgical kinetic module was introduced to determine the electrochemical reaction rate. An experiment was then conducted to validate the model, where the predicted oxygen contents agreed with the measured data within an acceptable accuracy range. Oxygen redistribution in both fluids is clarified: its transport rate at the metal droplet–slag interface is approximately one order of magnitude larger than that at the metal pool–slag interface. Further, the oxygen content in the metal pool is shown to increase with time, while the content in the slag layer is decreased. In order to effectively remove the oxygen in the metal, one more positive electrode, which is more likely to react with the oxygen, is proposed to be added in the unit.Graphical abstractDistributions of the electric streamlines and the phase distribution at 151.25 s with a current of 1800 A

A Class of Time-varying Models for a Kind of Industrial Process and Its Control Methodology

Class of time-varying models for a kind of industrial process and its control methodology

Improvement of Consarc ESR Furnace Control System

Data/mechanism Hybrid-Driven Modeling of Blast Furnace Smelting System and Global Sequential Optimization

Long-short Memory with Feature Representation by Latent-variable Model for Industrial Soft Sensor

Modelling of Blast Furnace Ironmaking Process Based on Digital Twin

A Computer Control System Designed for ESR Furnace

Constitution of Control Model for Electro-slag Remelting Process

The Estimation and Control of the Electroslag Remelting Melt Rate by Mechanism-Based Modeling

Self-organizing Fuzzy Controller for the Molten Steel Level Control of a Twin-Roll Strip Casting Process

Adaptive neural network controller for the molten steel level control of strip casting processes

Design of Subspace Predictive Controller in Scrap Copper Smelting

Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

Control-oriented modeling and simulation of a low carbon steel A.C. resistance spot welding process

Effective Variable Selection and Moving Window HMM-based Approach for Iron-Making Process Monitoring

System Identification for Robust Control of an Electrode Positioning System of an Industrial Electric Arc Melting Furnace

A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process

Predictive modeling of cement decomposing furnace temperature

Mathematical model for design of optimized multi-component slag for electroslag remelting

Computational modeling and control system of continuous casting process

Modeling of the secondary refining process of steel