Abstract:In order to realize the higher accuracy and stability of the CNC spinning machine, the structure of the weak link should be optimized. According to the force analysis of the carriage and the headstock, a longitudinal feed system with double screws three guides structure is proposed. A new double improved optimization method that to identify and improve the weak system basing on the static and dynamic characteristics of the whole machine, and then to the weak parts is proposed. Firstly, ANSYS Workbench software is used to analyze the static and dynamic characteristics of the whole machine, and the longitudinal feed system is identified as weak system. Aiming at the structural optimization of the longitudinal feed system, four structural models are established. The static and dynamic characteristics are contrastive analyzed by single factor analysis. The results show that the longitudinal feed system with double screws three guides structure has small static total deformation, high dynamic stiffness and strong anti-vibration ability, and identified that the carriage is the key part to affect the longitudinal feed system. Then the topology optimization and shape optimization method are used to optimize the structure of the carriage. Finally, the whole machine performance of the double screws three guides structure before and after the optimization is contrastive verified. The results show that under the premise of quality reduction, the static total deformation of the whole machine is reduced by 5.7%, and the natural frequency of the first six orders are improved in different degrees. The second natural frequency is increased by 21.7%, and the third natural frequency is increased by 21.2%. This new type of structure and double optimization method have a good engineering application value.

Design of the Instant Installation of the Alu-spindle Blade for the Tube of the Auto-doffing

The Design of the Spindle with Auto Yarn Gripping and Auto Tail Yarn Removing

The Optimization of the Key Components of the Spinning Machine Conveyor System Based on ISIGHT

Reduce the Spindle Fabrication Cost Using Knurling Technology

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

The Mechanical Analysis of the Doffing Process and the Mechanical Design of the Robot Doffer in the Ring Spinning Process

The Analytical Model of Ball-Spinning Force for Processing an Annular Groove on the Inner Wall of a Steel Tube

Analysis on design and optimization of a new vertical counter-roller spinning machine with four pairs of rollers

Design And Analysis Of Drum Lathe For Manufacturing Large-Scale Optical Microstructured Surface And Load Characteristics Of Aerostatic Spindle

An Investigation into Reducing the Spindle Acceleration Energy Consumption of Machine Tools

A research of spinning machine: Effect of different structures of feed system on the static and dynamic characteristics

Research on Structure Optimization of Longitudinal Feed System Design of CNC Spinning Machine

Development of a Continuous Vertical-pulling Automatic Doffing Robot for the Ring Spinning

Numerical simulation and experimental study on non-axisymmetric spinning with a groove at the middle of the tube

The Structure Design of and the Approach into the Spindle with the Inner Catch

Design and Analysis of Aerostatic Spindle with High Load Characteristics for Large Ultra-Precision Drum Lathe

Research on thinning spinning flaring for thin-walled tube

Optimal Design of an Aerostatic Spindle Based on Fluid–structure Interaction Method and Its Verification

Influence of Roller Distribution Modes on Spinning Force During Tube Spinning

Optimization and Design of Yarn Suction Duct on Automatic Cone Winding Machine

Manufacture of Workmanship Facility for Laser Cutting Tube