Bio-precipitation of Heavy Metals from a Synthetic Acidic Wastewater by Sulfate-Reducing Bacteria in a Bench Scale Continuous-Flow Stirred Tank Reactor

方迪,王方,单红仙,赵阳国,张瑞昌
DOI: https://doi.org/10.3969/j.issn.1674-5906.2010.03.011
2010-01-01
Abstract:The aim of this study was to investigate the performance of bioprecipitation of heavy metals from a synthetic acidic heavy metals-laden wastewater by the mixed acid-tolerant sulfate-reducing bacteria. Three influent samples with pH levels from 4.3 to 2.6 containing 65 mg·L~(-1) of Zn~(2+), 36 mg·L~(-1) of Cu~(2+), 10 mg·L~(-1) of Cr~(3+), 6 200 mg·L~(-1) of SO_4~(2+) were sequentially introduced into a bench-scale continuous-flow stirred tank reactor amended with sodium lactate as energy substrate. During the whole experimental periods, hydraulic retention time was controlled at 36h, and the temperature of reactor was kept at (32±1)~℃. The results showed that the bioprecipitation process by sulfate-reducing bacteria resulted in a sharp increase in the effluent pH from the initial pH 4.3~2.6 to pH 8.0~6.5, and 72% ~80% of sulfate reduction, and removal efficiencies greater than 99.9% for Zn, Cu, and 99.1% for Cr, respec-tively. Changing influent pH level from 4.3 to 2.6 decreased substantially the effluent alkalinity from ~7 500 to ,-4 600 mg·L~(-1), but had no marked adverse influence on the percentages of sulfate reduction and final removal of heavy metals. The recommended in-fluent pH level applied for the future larger-scale bioprecipitation process with sulfate-reducing was pH 3.5. The results of this work demonstrate that the bioprecipitation process by sulfate-reducing bacteria is of interest for its potential to remediate highly acidic heavy metals contaminated wastewaters.
What problem does this paper attempt to address?