Treatment of hexavalent chromium-containing electroplating wastewater by barium salt precipitation

Hang-bin LI,Bo QIAN,Cong-cong HUANG,Xin-cai CHEN,Shi-xin ZHANG,Xiang-hu LIU
DOI: https://doi.org/10.3969/j.issn.1004-227X.2014.09.017
2014-01-01
Abstract:Hexavalent chromium-containing electroplating wastewater was treated by barium salt precipitation. The effects of pH pre-adjustment of wastewater, cyanide decomposition method, and addition of Cr(VI) precipitator on the removal of hexavalent chromium, total chromium, copper, and nickel were studied. The influence of the dosage of sulfuric acid on the recovery of hexavalent chromium was examined. The optimal process parameters for treatment of hexavalent chromium-containing electroplating wastewater by barium salt precipitation are as follows:pre-adjusted pH 8, barium salt dosage 2.5 times of the theoretical value, cyanide decomposition with hydrogen peroxide, and final pH 10 adjusted with liquid caustic soda. After treating under the optimal process conditions, the total chromium content and nickel content in effluent is 0.4 mg/L and 0.3 mg/L, and no copper is detected, all of which are below the emission limits of Table 2 in the GB 21900–2008 standard. The recovery of hexavalent chromium in barium chromate sediment reaches 65% by solid–solid transformation using sulfuric acid. The costs for reagent and treatment of hazardous solid waste by barium salt precipitation are higher than those of traditional chemical reduction. Barium salt precipitation is suitable for professional chrome plating factories and plating industrial parks where chromium wastewater is strictly discharged and collected individually.
What problem does this paper attempt to address?