Abstract:Assorted morphologies of precipitates in fcc/bcc transformation systems have been reported, which often exhibit irrational characteristic. Various models have been developed to explain the habit plane (or the broad facet), but the overall morphologies of the precipitates are seldom explained quantitatively. In this work, the equilibrium cross-section of rod-shape austenite precipitates in duplex stainless steel is determined by atomistic simulation. The input orientation relationship (OR) between fcc and bcc phase is determined according to the O-line criterion (one of the interfaces contains a single set of dislocations), with the condition that the invariant line lies in close-packed plane pair of (1 (1) over bar(1) over bar)(f)|(10 (1) over bar)(b) and the Burgers vector of O-lines is [011](f|)/2|((1) over bar 11)(b)/2. The obtained OR is close to the K-S OR ((11 (1) over bar)(f)//(01 (1) over bar)(b), [101](f)//(111)(b)), with the deviation of 1.27 degrees from the parallelism in both planes and directions. Interfacial energy of interfaces in various orientations in the zone axis of the invariant line ([0.75 0.10 0.65](f)//[0.52 0.68 0.52](b)) has been calculated. To ensure the reliability of the calculated values, an initial atomic configuration free of interstitial and vacancy is constructed for each interface. The energies of the O-line interface, the interface normal to either Delta g(((1) over bar 11)) or Delta g((020)) are found to have similar values, each at a local minimum. Based on the calculated interfacial energies, the equilibrium cross-section morphology is determined by the Wulff construction. The result shows that the morphology exhibits a near rhombus cross-section, which agrees consistently with experiments. One of the major facets is the O-line interface, normal to ((0.66) over bar 0.12 0.74)(f)//((0.51) over bar (0.24) over bar 0.83)(b), in agreement with the observation. The other facet is normal to Delta g((020)) (((0.25) over bar (0.87) over bar 0.42)(f)//(0.45 (0.73) over bar 0.51)(b)) in the calculated result, while it is normal to Delta g(((1) over bar 11)) (((0.36) over bar (0.77) over bar 0.53)(f)//(0.31 (0.71) over bar 0.63)(b)) in experimental results, with about 10 degrees difference between them. The discrepancy between calculated and observed results is probably because the experiments have not reached the equilibrium state. The dislocation structures in these three interfaces are identified from the atomic simulation results by a newly developed method based on the singular value decomposition of the Nye tensor. It confirms that the O-line interface contains a single set of [011](f)/2 dislocations with spacing of 1.5 nm. The interface normal to either Delta g(((1) over bar 11)) or Delta g((020)) contains two sets of dislocations. The dislocation structure in the facet normal to Delta g((1) over bar 11)) is in good agreement with experimental observation of the non-O-line facet, including the local decomposition of dislocation core to (1 (1) over bar(1) over bar)(f) stacking faults.

An Extended Invariant Line Analysis for Fcc/bcc Precipitation Systems

The Invariant Line and Precipitate Morphology in Fcc-Bcc Systems

A Systematic Study of Irrational Precipitation Crystallography in Fcc–bcc Systems with an Analytical O-line Method

A two-dimensional analytical approach for phase transformations involving an invariant line strain

Analytical O-line Solutions to Phase Transformation Crystallography in Fcc/bcc Systems

Testing a model with an extended O(2) symmetry in two and three dimensions.

A systematic investigation of the development of the orientation relationship in an fcc/bcc system

General Solution for Inhomogeneous Line Inclusion with Non-Uniform Eigenstrain

O-lattice Analyses of Interfacial Misfit. II. Systems Containing Invariant Lines

A systematic study on the interfacial energy of O-line interfaces in fcc/bcc systems

The Analytical Theory of Bulk Melting II: Variational Method Solution in the FCC Crystal

From coherent to semicoherent Evolution of precipitation crystallography in an fcc/bcc system

A Study of a New Type of Deviation from the Kurdjumov–Sachs Orientation Relationship in Face-Centered-cubic/body-centered-cubic Transformation System

The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys

A Simple Method for Calculating the Possible Habit Planes Containing One Set of Dislocations and Its Applications to Fcc/bct and Hcp/bcc Systems

From coherent to semicoherent-Evolution of precipitation crystallography in an fcc/bcc system

Convertion and Its Application of Two Kinds of Discriptions on the Orientation Relationship

From Coherent to Semi-Coherent — Evolution of Precipitation Crystallography in an fcc/bcc System

Artificial boundary conditions for atomic simulations of face-centered-cubic lattice

On the crystallography of precipitation

An Investigation on the Equilibrium Morphology and Interfacial Structures of Pricipitates in Duplex Stainless Steel by Atomistic Simulation