Treatment of Centrifugal Mother Liquid of Polyvinyl Chloride by Internal Circulation Aerobic Biofilm Reactor: Lab to Plant Scale System
Salma Tabassum,Qinhong Ji,Chunjie Li,Lina Chi,Claudia G. Silva,Amin F. A. Ajlouni,Chunfeng Chu,Rua Alnoman,Zhenjia Zhang
DOI: https://doi.org/10.1016/j.jclepro.2018.07.276
IF: 11.1
2018-01-01
Journal of Cleaner Production
Abstract:Centrifugal mother liquid (CML) is a typical poorly biodegradable organic wastewater generated during the production of polyvinyl chloride (PVC). A method of treating PVC centrifugal mother liquid by a high efficiency internal circulation aerobic biofilm reactor (four reactors lined up together) is presented in this study. The optimized technique was tested and evaluated in a lab and in a plant scale system. The effect of chemical oxygen demand (COD) removal efficiency was studied under different hydraulic retention time (HRT): 40, 20, 17,14 and 12 h, respectively. Considering the efficiency and removal rate, the best HRT was 14 h. At HRT of 14 h, the average volume loading was 0.326 kg COD/(m(3).d). During the product shift from TL-1000 to TL-800 (two kinds of PVC products with different polymerization degree), the treatment efficiency of the system was not affected. Compared with the plant scale system, the results showed that in the lab setup the removal rates of centrifugal mother liquid of TL-1000 (total organic carbon (TOC) = 70-75 mg/L) and TL-800 (TOC = 20 mg/L) were 90%-95% and 80%-90%, respectively. While in the plant scale system, the removal rates of centrifugal mother liquid of TL-1000 and TL-800 were 80%-90% and 65%-80% (effluent TOC 7.5-12 mg/L), respectively. Biofilm formation by the microbial reproduction as well as intensive filamentous bacteria settlements were observed. (C) 2018 Elsevier Ltd. All rights reserved.