Abstract:When conducting retreat mining in segmented coal pillars, the dynamic evolution of stress and overlying strata structure is more complex than conventional working faces due to the influence of adjacent working faces. Understanding and mastering the dynamic evolution patterns of overlying strata structure after retreat mining in segmented coal pillar working faces is essential for guiding the safe recovery of coal pillar resources under similar conditions. Through statistical analysis of the types of residual coal and the mining techniques, the current research status of residual coal mining system in China has been summarized. Based on the safety recovery technology system for multi-type residual coal pillar resources at Zhaogu No.2 Mine, this paper focuses on narrow coal pillar working faces in sections with fully mined-out areas on both sides. By using research methods such as on-site measurement, theoretical analysis, numerical simulation, and engineering experiments, starting from the stress state analysis and evolution law of coal seam mining, the dynamic evolution law of the overlying rock structure of sectional coal pillars has been mastered. On this basis, a stress arch mechanical model of the mining area is constructed, and the working resistance of the support is calculated and determined, ensuring the safe recovery of the working face. The research results show that before the backfilling of the sectional coal pillar working face, the working face is affected by the overlapping mining of the goaf on both sides, presenting a "bimodal" stress distribution pattern, with a stress concentration coefficient between 1.78 and 3.2. After the extraction of segmented coal pillars, stress arches consisting of high-stress zones form along both the strike and dip of the working face. The structural support provided by stress arches undergoes a dynamic evolution process of "formation-development-elevation-stabilization" as the working face advances. Following the instability and rupture of the lower basic roof hinge structure, the stress-bearing structure shifts to the higher basic roof, continuing to provide support for the surrounding rock stress in the mining space of the working face. A stress arch mechanical model for the dip and strike of the mining area is constructed , and the shape characteristics of the overlying rock stress arch in the coal pillar working face is mastered. Based on the stress distribution law and stress arch evolution characteristics of the surrounding rock of the coal pillar working face, the maximum working resistance of the support in the working face is theoretically calculated to be 9153.48kN. Compared with the measured mine pressure data, the selected support effectively ensures the safety production of the working face.

Research on the Laws of Strata Behavior in the Large Mining Height Fully-mechanized Face and Control Technologies for Surrounding Rocks

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Overburden Breaking Law and Safe Mining Technology in Thin Bedrock Stope with Thick Alluvium

Strata behavior law of working face and control strategies for deep backfill coal mining: a case study

Strata Behaviors Regularity of Fully Mechanized Face Measured in Xin'an Coal Mine

Study on the Migration Law of Overlying Strata on the Working Surface of Large Mining Height in Y.C.W Coal Mine

Breaking law of overburden rock and key mining technology for narrow coal pillar working face in isolated island

Study on Cross Main Tunnel Mining Next to Large Fault Structure

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Model of Overlying Strata Structure in Large Mining Height Excavating Condition and Calculation of Support Working Resistance

Study on the Relationship between Hydraulic Support on the Working Face with Large Mining Height and Surrounding Rock

Research on Mutual Function Relationship Between Strata Movement and Hydraulic Powered Supports of Fully Mechanized Longwall Mining Face in Thin Seam with Close Distance to Each Seam

The Roof Safety under Large Mining Height Working Face: A Numerical and Theoretical Study

Abutment Pressure Distribution Law and Support Analysis of Super Large Mining Height Face

Study on overlying strata movement patterns and mechanisms in super-large mining height stopes

Analysis Of Overlying Strata Movement And Behaviors In Caving And Solid Backfilling Mixed Coal Mining

Research on the Movement Law of Roof Structure in Large-Inclined Coal Seam Working Face: A Case Study in Liu.Pan.Shui. Mining Area

Research on an Intelligent Mining Complete System of a Fully Mechanized Mining Face in Thin Coal Seam

Study on Surrounding Rock Stability of Long-Span Coal Roadway under Influence of Mining and Support Technology Optimization

Study on Surrounding Rock Control and Support Stability of Ultra-Large Height Mining Face