The Characteristics of Granular-Bright Facet in Hydrogen Pre-Charged and Uncharged High Strength Steels in the Very High Cycle Fatigue Regime

Y. D. Li,S. M. Chen,Y. B. Liu,Z. G. Yang,S. X. Li,W. J. Hui,Y. Q. Weng

DOI: https://doi.org/10.1007/s10853-009-4007-5

IF: 4.5

2009-01-01

Journal of Materials Science

Abstract:In this study, the effect of hydrogen on fatigue strength of high strength steels in the very high cycle fatigue regime was further discussed. It is found that the calculated results of fatigue strength by modified Murakami’s expression are in good accordance with the experimental results in ±15% error band. The relationship between fatigue life (Nf) and the ratio of granular-bright facet (GBF) to inclusion size \( \left({\frac{{\sqrt {A_{\text{GBF}} } }}{{\sqrt {A_{\text{inc}} } }}}\right) \) for quenching and tempering (QT) specimens and pre-charged specimens by soaking (SK) and cathodic (CD) charging can be approximately expressed by \( {\frac{{\sqrt {A_{\text{GBF}} } }}{{\sqrt {A_{\text{inc}} } }}} = {\frac{{R_{\text{GBF}} }}{{R_{\text{inc}} }}} = 0. 2 5N_{\text{f}}^{ 0. 1 2 5} \); however, the value of \( {\frac{{\sqrt {A_{\text{GBF}} } }}{{\sqrt {A_{\text{inc}} } }}} \) for specimens pre-charged by high-pressure thermal hydrogen charging is obviously greater than that for QT specimens and pre-charged specimens by SK and CD charging at an identical Nf. The stress intensity factor range at the periphery of the GBF, ΔKGBF, was calculated in this work. It is found that the value of ΔKGBF is not a constant but approximately proportional to \( (\sqrt {A_{\text{GBF}} } )^{ 1/ 3} \). Besides it is also found that ΔKGBF decreases with the increase of hydrogen content.