Abstract:<p>SmCo-based permanent magnets possessing high Curie temperature and outstanding magnetocrystalline anisotropy are of great scientific and technological value on high temperature applications. It is widely accepted the coercivity mechanism as well as its temperature dependence is closely related to the microstructure and microchemistry. However, direct domain wall pinning observation with Lorentz microscopy is extremely difficult to explore the strength of domain wall pinning under high temperature and strong magnetic field. The quantitatively understanding of coercivity mechanism such as micromagnetic simulations cannot be carried out without the intrinsic magnetism of 1:5H and 2:17R inside the cellular microstructure of SmCo sintered magnets. Up to nowadays, there are no methods to directly measure the intrinsic magnetism of nanometer scale 1:5H and 2:17R, which retards the exploring of coercivity mechanism especially at high temperature. Herein, we prepared Sm(CoCuFeZr)<sub>z</sub> high-temperature permanent magnets with the ratio z values ranging from 7.0 to 7.8 and measured the microchemistry of 1:5H and 2:17R phases with transmission electron microscopy. Then single-phase solid solution samples with the same composition as 1:5H and 2:17R phases were prepared and the high temperature magnetic properties are measured directly. The coercivity mechanism can be well explained based on the difference of domain wall energy density qualitatively, including the abnormal temperature dependence of coercivity. More importantly, the quantitatively calculated coercivity according to the pinning-hardened coercivity theory with the obtained intrinsic parameters were found to agree well with the experiment results. Our work on the intrinsic magnetism of 1:5H and 2:17R phases at varying temperatures may offer important guidance for compositions design of the magnets with higher performance.</p>

Design and Fabrication of Sintered Nd-Fe-B Magnets with A Low Temperature Coefficient of Intrinsic Coercivity

Brazing and Magnetic Properties Control of Sintered NdFeB Permanent Magnet with High Coercivity

Effect of first annealing and sintering temperature on magnetic properties of Dy2O3 doped Nd-Fe-B sintered magnets

Fabrication of Low-Cost Nd–Fe–B Sintered Magnets Reusing Ultrafine Powders

Improvement of coercivity thermal stability of sintered 2:17 SmCo permanent magnet by Nd doping

Design and fabrication of Nd-Fe-B magnet with excellent thermal stability

On the Cooling Rate of Strip Cast Ingots for Sintered NdFeB Magnets

Coercivity Enhancement of Low Rare Earth Nd–Fe–B Sintered Magnets by Optimizing Microstructure

Coercivity enhancement of NdFeB sintered magnets by low melting point Dy32.5Fe62Cu5.5 alloy modification

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Origin of low coercivity of high La–Ce-containing Nd–Fe–B sintered magnets

High performance 2:17 type SmCo permanent magnets with low temperature coefficients

Sensitivity of Coercivity and Squareness Factor of a Nd-Fe-B Sintered Magnet on Post-Sintering Annealing Temperature

Quantitative analysis of pinning-hardened intrinsic coercivity of Sm(CoFeCuZr)z (z = 7.0–7.8) high-temperature permanent magnets

A novel strategy to design and fabricate Nd-Fe-B magnets

Microstructure, coercivity and thermal stability of nanostructured (Nd,Ce)-(Fe,Co)-B hot-compacted permanent magnets

An effective route for tuning microstructure and properties of sintered Nd-Fe-B magnets: Low pressure sintering technology

Sintering temperature optimization for enhanced magnetic performance in La–Ca–Co doped strontium ferrite

Temperature stability of coercivity in mischmetal-Fe-Co-B melt-spun ribbons

Microstructure Improvement Related Coercivity Enhancement for Sintered NdFeB Magnets after Optimized Additional Heat Treatment

Efficient co-diffusion of Tb and Co in a sintered Nd-Fe-B magnet by low-melting point alloys