Abstract:ITO nanoparticles were generated in the gas phase with a magnetron plasma gas aggregation cluster source. Their morphologies were modified by modulating the discharging power of magnetron sputtering. The shape of the nanoparticles changed from rough spheroid formed with a higher discharging power to multi-branch formed with a lower discharging power. With a discharging power of 25 W, the ITO nanoparticles were enriched with tripod and tetrapod-shaped nanoparticles. The formation mechanism of multi-branch nanoparticles was attributed to the oriented attachment of the initially nucleated smaller nanocrystallites. Transparent conductive ITO nanoparticle films were fabricated by depositing the preformed nanoparticles with controlled thickness. The electron conduction in the film was dominated by electron tunnelling and/or hopping in the percolative channels comprised of closely spaced ITO nanoparticle assemblies and could be tuned from highly resistive nonmetal-like to highly conductive metal-like by changing the deposition thickness. The film also displayed a SPR band in the near-IR region. The conductivity of the multi-branch ITO nanoparticle film was significantly superior to that of the spheroidal nanoparticle film. For a 46 nm thick multi-branch ITO nanoparticle film, a surprisingly low specific resistance of 3.09 x 10(-4) omega cm, which is comparable to the top-class conductivity of bulk ITO films, was obtained after annealing at a mild temperature of 250 degrees C, with a transmittance larger than 85%.

Fabrication and Properties of Dc Magnetron Sputtered Indium Tin Oxide on Flexible Plastic Substrate

Indium-tin Oxide Conductive Films on Flexible Substrates Deposited by the DC Magnetron Sputtering Method

Properties of PET/ITO Thin Films Deposited by DC Magnetron Sputtering

Fabrication and property of conductive substrate for flexible organic light-emitting devices

Study of Flexible Organic Light-emitting Devices

Gas Phase Fabrication of Morphology-Controlled ITO Nanoparticles and Their Assembled Conductive Films.

Flexible OLED fabrication with ITO thin film on polymer substrate

Fabrication of Low-temperature ITO Thin Film and Its Application in TOLEDs

Method for preparing indium tin oxide (ITO) thin film with flexible polyester (PET) substrate by magnetron sputtering

Low Temperature Dc Sputtering Deposition on Indium-Tin Oxide Film and Its Application to Inverted Top-Emitting Organic Light-Emitting Diodes

A high quality ITO/PET electrode for flexible and transparent optoelectronic devices

Study on Adhesion and Electro-Optical Properties of ITO Films on Flexible PET Substrate

Flexible Substrates with Polyimide Buffer Layers for Organic Light-Emitting Diodes

Flexible Organic Light-Emitting Diodes with Improved Performance by Insertion of an UV-sensitive Layer

Influence of Al2o3 Buffer Layers on the Properties of Indium-Tin Oxide Films on Pet Substrate by Rf-Magnetron Sputtering

Study of Flexible Organic Light-emitting Device Based on Poly(Ethylene Glycol)2,6-Naphthalate(PEN) Substrate

Multicoated Flexible Indium Tin Oxide Electrodes Fabricated Using Magnetron Sputtering and Arc Plasma Ion Plating for Flexible Perovskite Solar Cells

Ultraviolet Light-Assisted Growth of Indium Tin Oxides Films on Flexible Substrates

Microstructure and Resistivity of Low Temperature Deposition Ito Films on Pet Substrate by Magnetron Sputtering

Evaluation of Transparent ITO/Nano-Ag/ITO Electrode Grown on Flexible Electrochromic Devices by Roll-to-Roll Sputtering Technology

Optimization Method For Transparent Conducting Oxide Films Prepared By Dc Magnetron Sputtering