Abstract:This study employed the water-thermal coupled high-temperature CO2 gasification method using Zhundong coal as the raw material to prepare porous carbon materials. A dual-function catalyst for NO x adsorption and reduction was prepared by loading Cu, Mn, and Ce components onto the carbon material through hydrothermal impregnation. The influence of metal loading content on the pore structure, surface functional groups, and synergistic effects between metals in the carbon-based catalyst was investigated during the preparation process. In the process of NO x removal using carbon-based catalysts, the primary components comprise two distinct phases: NO x adsorption and CO-SCR experiments. The experimental sequence involves the initial execution of NO x adsorption tests, succeeded by subsequent reduction treatments. These processes are undertaken systematically to comprehensively investigate the attributes of the catalyst. The physical and chemical parameters of the samples were characterized using XRD, Raman, H2-TPR, NO x -TPD, and other techniques. Finally, the NO x adsorption and reduction mechanism of representative samples were deeply analyzed using in situ DRIFTS. The results showed that when the loading amounts of Cu, Mn, and Ce were 0.006, 0.012, and 0.003 g, respectively, the pore structure of the catalyst was excellent, with a NO x adsorption performance (q e) of 16.23 mg/g, and the NO conversion rate reached 66% at 200 °C. This is mainly attributed to the enhanced interaction between metal species on the catalyst surface by optimizing the metal content on the carbon support, which promotes the dissociation of NO in the NO + CO reaction. In situ DRIFTS results confirmed that NO and CO adsorb on the catalyst surface, and CO* reacts with NO* to produce N2 and CO2, following the Langmuir–Hinshelwood mechanism.

Physicochemical Properties of Metal-Doped Activated Carbons and Relationship with Their Performance in the Removal of SO2 and NO.

Simultaneous Removal of SO2, NO, and CO2 on Metal-Modified Coconut Shell Activated Carbon

Investigation on Fe-Co Binary Metal Oxides Supported on Activated Semi-Coke for NO Reduction by CO

Surface Effects of Trace CuMnCe Loading on Coal-Based Carbon Materials and Mechanisms of NO x Adsorption and Removal

Supported Metal Sulfates on Ce–TiOx As Catalysts for NH3–SCR of NO: High Resistances to SO2 and Potassium

Multi-stage semi-coke activation for the removal of SO2 and NO

Adsorption–Reduction Behavior of Co(NH3) on Activated Carbon

Nitrogen-Doped Pitch-Based Activated Carbon Fibers with Multi-Dimensional Metal Nanoparticle Distribution for the Effective Removal of NO

Effect of Metallic Oxides on Adsorption of SO2 on Activated Carbon

Effect of Metal Additives on the Catalytic Performance of MnOx-CeO2 Supported on Activated Carbon Hon Eycomb in NO Removal at Low Temperature

Experimental Study on Adsorption of SO2 and NH3 by Activated Carbon with Monometallic Active Sites at Low Concentration under Room Temperature

Study on Coadsorption of SO2, NO, and CO2 over Copper‐supported Activated Carbon Sorbent in Different Operating Conditions

A comparative study of different doped metal cations on the reduction, adsorption and activity of CuO/Ce0.67M0.33O2 (M=Zr4+, Sn4+, Ti4+) catalysts for NO+CO reaction

Synergistic effect and mechanism of FeO and CeO co-doping on the superior catalytic performance and SO2 tolerance of Mn-Fe-Ce/ACN catalyst in low-temperature NH3-SCR of NO

Selective catalytic reduction of nitric oxide with carbon monoxide over alumina-pellet-supported catalysts in the presence of excess oxygen

A Novel Double Metal Ions-Double Oxidants Coactivation System for NO and SO2 Simultaneous Removal

Bimetallic Cerium–copper Nanoparticles Embedded in Ordered Mesoporous Carbons As Effective Catalysts for the Selective Catalytic Reduction of NO with NH3

DeNOx Performance and Characteristic Study for Transition Metals Doped Iron Based Catalysts

Preparation, Characterization, and Catalytic Performance of High Efficient CeO2-MnOx-Al2O3 Catalysts for NO Elimination

New Understanding of the Promotional Nature of SO2 on Ce-Based Oxide Catalysts for Selective Catalytic Reduction of NO X with NH3

Ce(SO4)2/α-Fe2O3 selective catalytic reduction of NOx with NH3: preparation, characterization, and performance