Abstract:Titanium and titanium alloy materials are often made as medical implants. Surface properties of titanium medical implants play decisive roles for antibacterial and biological response and tissue biocompatibility. In this study, cathode arc evaporation (CAE) technology was used to deposit TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings with nanostructures on the Ti–6Al–4V dental abutment screws. The deposited coatings were then oxidized at high temperature to produce different oxides on the surface of the coatings. The mechanical properties , antibacterial properties and biocompatibilities of the coatings were analyzed. The effect of coatings on the abutment screw loosening and removal torque between the abutment screw and the pure titanium implant fixture was studied by removal torque measurement. In addition, Staphylococcus aureus (S. aureus) was used for evaluating the antibacterial properties of coatings, and mouse fibroblasts (L929) were used for ISO 10993-5 cytotoxicity analyses to determine whether it had good biocompatibility. Nanolayered structures and multiphases of polycrystalline TiNb–Zr–Ta were obtained by co-deposition of Ta , Zr and TiNb. When small content of N was introduced, the TiNb–Zr–Ta(N) showed a polycrystalline TiNb–Zr–Ta where N atoms entered the metallic lattice at interstitial sites. After oxidation, oxide phases of Ta 2 O 5 , TiO 2 , Nb 2 O 5 and ZrO 2 were formed on the surface of TiNb–Zr–Ta and TiNb–Zr–Ta(N). Ta 2 O 5 was obtained on the surface of the coating prior to other oxides such as TiO 2 , Nb 2 O 5 and ZrO 2 . The deposited TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had high contact angle and exhibited a hydrophobic feature, while the annealed TiNb–Zr–Ta–O and TiNb–Zr–Ta(N)–O showed hydrophilicity. The deposited TiNb–Zr–Ta had similar hardness and Young's modulus values to that of the uncoated Ti–6Al–4V. When N was doped, the TiNb–Zr–Ta(N) had the highest hardness and Young's modulus. The hardness of the annealed TiNb–Zr–Ta(N) coating only decreased slightly due to the small oxide layer of ∼140 nm. Compared with the uncoated Ti–6Al–4V, TiNb–Zr–Ta serial coatings deposited on abutment screws had higher removal torques, which prevented the abutment screw of dental implant from loosening after long-term use. The biocompatibility of TiNb–Zr–Ta serial coatings was similar to that of the uncoated Ti–6Al–4V. In addition, the oxidized TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had excellent antibacterial properties. It is speculated that the resulting Ta 2 O 5 of both coatings may inhibit bacterial growth and improve the antibacterial effect. Based on the above advantages, the TiNb–Zr–Ta serial coatings are expected to have the potential to be applied to biomedical implants.

Bacteria Adherence Properties of Nitrogen-Doped Tio2 Coatings by Plasma Surface Alloying Technique

Fabrication and Biological Evaluation of the Coating Co‐doped Strontium and Zinc Nanoparticles on Porous Pure Titanium Surface by Hydrothermal Method

Enhanced Bacteriostatic Properties of Ti Alloys by Surface Nitriding

Corrosion resistance and antibacterial activity of Ti-N-O coatings deposited on dental titanium alloy

Spray-deposited Ag nanoparticles on micro/nano structured Ti6Al4V surface for enhanced bactericidal property and cytocompatibility

Influence of Nitride Coatings on Corrosion Resistance and the Biocompatibility of Titanium Alloy Products

Ag-Incorporated Polydopamine/Tannic Acid Coating on Titanium With Enhanced Cytocompatible and Antibacterial Properties

Enhanced Bacterial and Biofilm Adhesion Resistance of ALD Nano-TiO2 Coatings Compared to AO Coatings on Titanium Abutments

Adhesion and growth of titanium nitride coating deposited on AISI 316L using cylindrical magnetron sputtering

Mechanical, antibacterial and cytotoxic characteristics of nanolayered TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings

Enhanced Antibacterial Properties of Biocompatible Titanium Via Electrochemically Deposited Ag/TiO2 Nanotubes and Chitosan–gelatin–ag–zno Complex Coating

Multilayered composite coatings of titanium dioxide nanotubes decorated with zinc oxide and hydroxyapatite nanoparticles: controlled release of Zn and antimicrobial properties against Staphylococcus aureus

Study on Zn-doped antibacterial bioactive coatings on Ti6Al4V titanium alloy surfaces by micro-arc oxidation

Enhancing antibacterial properties of titanium implants through a novel Ag-TiO2-OTS nanocomposite coating: a comprehensive study on resist-killing-disintegrate approach

Anticorrosive and Antibacterial Evaluation of ZnO Nanoscale Sheets Electrosynthesized onto Ti6Al4V and Nitinol Alloys Previously Modified by Chemical Oxidation in H2O2

Tantalum Nitride-Decorated Titanium with Enhanced Resistance to Microbiologically Induced Corrosion and Mechanical Property for Dental Application

Surface Characterization and Electrochemical Studies of Biomedical Niti Alloy Coated with Tin by Piiid

Covalent incorporation of Ag nanoparticles into TiO2 nanotubes on Ti6Al4V by molecular grafting for enhancing antibacterial effect

Preparation of tantalum-containing coatings on NiTi shape memory alloys with enhanced in vitro cytocompatibility and antibacterial effectiveness

An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications

Influence of TiO2 Nanostructure Size and Surface Modification on Surface Wettability and Bacterial Adhesion