Abstract:Medical grade titanium alloy is widely used for bone/dental implants, but the material alone has no innate antimicrobial properties that would reduce infection risk following surgery. However, silver nanoparticles (Ag NPs) are known to be antibacterial. This study investigated the growth of Ag NPs on titanium dioxide nanotubes (TiO2 NTs) on Ti-6Al-4V discs. The TiO2 NTs were grown on the Ti alloy using an electrochemical method, and then decorated with Ag NPs. The Ag NPs were synthesised by chemical reduction using δ-gluconolactone. A silver ammonia solution (silver nitrate + liquid ammonia) was used as the source of silver. Two separate approaches were used: (1) The δ-gluconolactone was mixed with the silver ammonia and then exposed to the TiO2 NTs (the 'mixing method'), which produced micron-sized clusters of the Ag NPs. (2) The TiO2 NTs were exposed to the silver ammonia first and then to δ-gluconolactone (the 'sequential addition method'), which resulted in the formation of nano-sized clusters of the nanoparticles. The Ag-TiO2 composites were confirmed by scanning electron microscopy and the elements analysed using energy dispersive X-ray spectroscopy (EDS). The composite coatings were exposed to a simulated body fluid for 24 h in order to determine the total Ag released. The release from the micron-sized clusters from the mixing method (14.6 ± 0.67 ppm) was higher than that from the nano-sized clusters (4.05 ± 0.36 ppm) when 0.015 M of silver ammonia was used. Additionally, Staphylococcus aureus, was cultured on the composite coatings for 24 h. Both the micron- and nano-sized clusters of the Ag NPs were found to be antibacterial using the Live/Dead assay. Overall, δ-gluconolactone was successfully used to reduce silver to Ag NPs on the surface of TiO2 NTs. The sequential addition method was the preferred method of synthesis because of its slower silver release, better coverage of the Ag-NPs on the TiO2 NTs and strong antibacterial properties.

Spray-deposited Ag nanoparticles on micro/nano structured Ti6Al4V surface for enhanced bactericidal property and cytocompatibility

Covalent incorporation of Ag nanoparticles into TiO2 nanotubes on Ti6Al4V by molecular grafting for enhancing antibacterial effect

The Optimization of the Synthesis of Antibacterial Coatings on Ti6Al4V Coupons Obtained by Electron Beam Melting

Deposition of Silver Nanoparticles on Titanium Surface for Antibacterial Effect.

Enhanced Antibacterial Properties of Biocompatible Titanium Via Electrochemically Deposited Ag/TiO2 Nanotubes and Chitosan–gelatin–ag–zno Complex Coating

Anodised TiO2 Nanotubes As a Scaffold for Antibacterial Silver Nanoparticles on Titanium Implants.

Antibacterial Properties And Cytocompatibility Of Ti-20zr-10nb-4ta Alloy Surface With Ag Microparticles By Laser Treatment

Fabrication and evaluation of silver modified micro/nano structured titanium implant

Enhancing Antibacterial Performance and Biocompatibility of Pure Titanium by a Two-Step Electrochemical Surface Coating

Deposition of Catechol-Functionalized Chitosan and Silver Nanoparticles on Biomedical Titanium Surfaces for Antibacterial Application.

Simultaneous improvement in mechanical properties, corrosion resistance and antibacterial properties of Ti-Ag sintered alloy with gradient nanostructure

Antibacterial property and bioadaptability of Ti6Al4V alloy with a silvered gradient nanostructured surface layer

Sol–gel Derived Ag-containing TiO2 Films on Surface Roughened Biomedical NiTi Alloy

Antibacterial Activity of Silver Doped Titanate Nanowires on Ti Implants

Thermally Reduced Silver Micro-Nanoparticles on Surface of Biomedical Titanium

Construction of a Rough Surface with Submicron Ti2Cu Particle on Ti-Cu Alloy and Its Effect on the Antibacterial Properties and Cell Biocompatibility

Electrophoretic deposition of photothermal responsive antibacterial coatings on titanium with controlled release of silver ions

Production and Characterization of Bioactive and Antimicrobial Titanium Oxide Surfaces with Silver Nanoparticles and a Poly(lactic Acid) Microfiber Coating

Bacteria Adherence Properties of Nitrogen-Doped Tio2 Coatings by Plasma Surface Alloying Technique

Bactericidal and biocompatible properties of TiN/Ag multilayered films by ion beam assisted deposition

Cytotoxicity and Antibacterial Property of Titanium Alloy Coated with Silver Nanoparticle-Containing Polyelectrolyte Multilayer.