Abstract:Dye-sensitized solar cell (DSSC) is one of the most promising alternatives to the conventional p-n junction photovoltaic device. Here, we have explored the morphology and structure variation and the accompanying solar cell performance change of two different TiO2 beads-based photoanodes made from the same precursor. The first was synthesized hydrothermally at acidic condition whereas the second was synthesized solvothermally at slightly basic condition. The first material, referred as Bead-A with an average particle size of similar to 2.0 mu m consists of rutile and brookite TiO2 phases while the second material, Bead-B, with smaller diameter of similar to 500 nm consists solely of anatase TiO2 phase. The pertaining formation mechanisms for both materials are explored. The performances of DSSCs based on Bead-A-P25 and Bead-B-P25 bi-layer photoanodes are higher than that based on pure P25. Cell based on Bead-B showed slightly better DSSC performance than Bead-A. It becomes apparent that Bead-A is advantageous in terms of fast electron transport due to its larger particle size and the presence of 1D rutile nanorods in addition to the carbon doping. Bead-B, on the other hand, gives advantages of superior light scattering properties and high surface area for dye loading. We further improved the cell performance by combining the advantages from both materials via optimized layer arrangement. By placing larger Bead-A particles on top of the smaller Bead-B particles, the top layer suppresses carrier recombination and confines the incident light within the photoanode, essentially enhancing charge harvest and collection efficiency. The performance of DSSC based on bi-layer Bead-A and Bead-B photoanode is superior to their counterpart based on bead-P25 bi-layer films. The cell operated using this bi-layer photoanode demonstrated short-circuit current density (J(sc)) of 15.67 mA cm(-2), open circuit voltage(V-OC) of 721 mV and power conversion efficiency of 7.24%. (C) 2016 Elsevier Ltd. All rights reserved.

Promoting Effect of Layered Titanium Phosphate on the Electrochemical and Photovoltaic Performance of Dye-Sensitized Solar Cells

Improved dye-sensitized solar cells by composite ionic liquid electrolyte incorporating layered titanium phosphate

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Improved Quasi-Solid Dye-Sensitized Solar Cells by Composite Ionic Liquid Electrolyte Including Layered Α-Zirconium Phosphate

Highly efficient overlayer derived from peroxotitanium for dye-sensitized solar cells

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

Composite electrolytes with nano-channels for quasi-solid dye-sensitized solar cells

Improving of the Photovoltaic Characteristics of Dye-Sensitized Solar Cells Using a Photoelectrode with Electrospun Porous TiO2 Nanofibers

Enhancing the Performance of Nanocrystalline TiO2 Dye-Sensitized Solar Cells with Phenothiazine-Doped Blended Solid Polymer Electrolyte

Enhanced exchange current density and diffusion coefficient of iodide-based liquid electrolyte by layered α-zirconium phosphate

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

Ionic liquid effect for efficiency improvement in poly(methyl acrylate)/poly(vinyl acetate)-based dye-sensitized solar cells

Effect of Layered Zirconium Phosphate and ZrO_2 Powder on Properties of Dye Sensitized Solar Cell Electrolyte

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

Poly(ethylene glycol)/poly(vinylidene) fluoride/TiO2 nanoparticle composite for sandwiched solid-state dye-sensitized solar cells

Tio2-P4vp Nanocomposite Electrolyte For Dye-Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

A dye-sensitized solar cell based on natural photosensitizers and a PEDOT:PSS/TiO2 film as a counter electrode

Dual Functional Polymer Interlayer for Facilitating Ion Transport and Reducing Charge Recombination in Dye-Sensitized Solar Cells.

Efficiency enhancement due to the combined mixed cation effect and TiO2 nanofiller effect in PEO and ionic liquid-based dye-sensitized solar cells