Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic testing technology is widely used for its exceptional accuracy and resolution. Commercial ultrasonic testing systems basically use piezoelectric transducers as ultrasonic excitation elements. However, the performance of piezoelectric transducers is not stable enough in high-temperature and high-humidity environments. Therefore, a fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber (CPCF) was proposed. The CPCF guides the laser in the core into the photoacoustic material and realizes the ultrasonic excitation on the side wall of the fiber based on the optical-thermal-acoustic energy conversion. Finite element analysis and experimental research on the photonic crystal fiber (PCF)-CPCF-PCF microstructure show that controlling the CPCF length precisely enables quantitative modulation of the optical coupling coefficient, reflecting the optical energy in photoacoustic energy conversion. Three PCF-CPCF-PCF microstructures with different optical coupling coefficients were fusion spliced onto an optical fiber, and three-point ultrasonic excitation was successfully achieved on aluminum plates. The peak-to-peak values are all around 1.5 V, indicating that the energy of ultrasonic waves is balanced, which helps realize the baseline-free and standardized application of transmitters. Furthermore, the detection effect of ultrasonic waves generated by the transmitter on the thickness and defects of the plate was studied. By analyzing the ultrasonic echoes in the aluminum and carbon fiber-reinforced polymer plates, the corresponding wave speeds were calculated to be 6030.52 and 2522.34 m/s, similar to the longitudinal wave speeds in the corresponding materials. The indicators of ultrasonic waves in the time domain and frequency domain are sensitive to the thickness and defects of the plate. The amplitude and time-of-flight of the ultrasonic wave change monotonically with increasing damage severity. This study elucidates the principle of the fiber optic ultrasonic transmitter and demonstrates its capability of quasi-distributed ultrasonic excitation. Furthermore, the feasibility of non-destructive testing based on this transmitter was also verified.

High-Frequency Ultrasonic Hydrophone Based on a Cladding-Etched DBR Fiber Laser

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

Corrugated-Diaphragm Based Fiber Laser Hydrophone with Sub-100 μPa/Hz1/2 Resolution

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

D-Shaped Fiber Bragg Grating Ultrasonic Hydrophone With Enhanced Sensitivity and Bandwidth

Research of High Sensitivity and Anti-Acceleration of DFB Active Fiber Grating Hydrophone

High-sensitivity compact ultrasonic detector based on a pi-phase-shifted fiber Bragg grating

Broadband high-sensitivity acoustic sensing based on Brillouin random fiber laser

A High-Performance Fiber-Optic Hydrophone for Large Scale Arrays

Ultrasonic Lamb Wave Detection Based on a Tunable, Narrow-Linewidth, and Frequency-Locked Fiber Laser

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Ultrasensitive ultrasound detection using an intracavity phase-shifted fiber Bragg grating in a self-injection-locked diode laser

Fiber-Optic Acoustic-Velocity Hydrophone Based on Castor-Oil-Loaded Fiber-Laser Cantilever

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

Low-frequency vibration measurement by a dual-frequency DBR fiber laser

A fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber for ultrasonic testing

Hybrid Integrated Ultralow-Linewidth and Fast-Chirped Laser for FMCW LiDAR

Low Frequency Anti-Interference Mechanism of Axial Stretching Fiber Laser Hydrophones

High temperature resistant ultra-short DBR Yb-doped fiber laser

Ultra-short cavity distributed bragg reflector Er-doped fiber laser for temperature-insensitive bending measurement