Abstract:2.25Cr-1Mo-0.25 V steel has been widely used to manufacture hydro-processing equipment operating under harsh environments for its good creep performance. Warm bending, a common fabricating process of 2.25Cr-1Mo-0.25 V steel ring shells, inevitably changes the creep property of 2.25Cr-1Mo-0.25 V steel, but its detailed effect still remains obscure. In this work, we experimentally investigated the impact of warm bending on the microstructure and creep behavior of 2.25Cr-1Mo-0.25 V steel. First, a series of creep rupture tests were carried out at 482 °C and 350 MPa, in which test materials were extracted from an actually fabricated ring shell and its raw plate. Thereafter, the microstructures of test materials were semi-quantitatively analyzed by various characterization techniques, such as electron backscatter diffraction (EBSD) and three-dimensional high-resolution X-ray computed tomography (3D μ-XCT). Finally, warm forming induced microstructural degradation as well as their implication for creep was discussed in detail. Creep rupture tests showed that warm bending leads to a significant decrease in creep lifetime at the surface region of virgin plate but a slight decline at the central region of virgin plate. An inhomogeneous creep resistance distribution was thereby revealed along the thickness direction of the ring shell, which could not be completely eliminated by subsequent tempering at 705 °C for 8 h. Moreover, microstructural observations demonstrated that warm deformation leads to multiple microstructural deterioration, including carbide coarsening, ferrite matrix softening, void defect increasing, etc. Their combined action appears to accelerate the creep fracture behavior of 2.25Cr-1Mo-0.25 V steel. This work will contribute to the long-term safety and integrity assessment of 2.25Cr-1Mo-0.25 V steel structures. Graphical abstract

A Method of Deriving Material Bending Small Creep Properties by Three-Point Specimen Tests

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Modified Reference Area Method to Estimate Creep Behaviour of Service-Exposed Cr5Mo Based on Spherical Indentation Creep Test

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

AN ANALYSIS OF ELASTIC-PLASTIC-CREEP DAMAG FOR SMALL PUNCH CREEP TEST

An elastic-plastic-creep finite element analysis for small punch creep test specimens

A Statistical Model to Predict the Steady-State Creep Rate

Effect of constraint on creep fracture toughness of a Cr-Mo-V steel

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

Creep Property Assessment Of Type 304 By Small Punch Creep Test

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

Creep analysis of concrete filled steel tube columns under long-term eccentric load by the method of 3D finite element

Study on Small Punch Creep Test for SUS304

A new creep damage assessment method for metallic material under variable load conditions at elevated temperature

Experimental Study and Numerical Simulation of Creep Damage of Small Punch Creep Test Specimen of SS304 Stainless Steel

Theoretical Investigation of Creep in Concrete Filled Steel Tube Columns under Long-Term Load

Semi-analytical creep model to obtain Norton's law of materials under flat indentation and its applications

A Study on Influence Factors of Small Punch Creep Test by Experimental Investigation and Finite Element Analysis

Using spherical indentation to determine creep behavior with considering empirical friction coefficient

Measurement of Creep Damage by the Natural Frequency Method