Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Controlled Growth of Single-Walled Carbon Nanotubes from a Line Patterned Mesoporous Silica Template

The Controlled Pattern Growth of Aligned Carbon Nanotubes

Diameter controlled growth of single-walled carbon nanotubes from SiO2 nanoparticles

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Directed growth of multiwalled carbon nanotubes from ordered porous silica structures

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Long and Oriented Single-Walled Carbon Nanotubes Grown by Ethanol Chemical Vapor Deposition

Growth of Single-Walled Carbon Nanotubes from Discrete Catalytic Nanoparticles of Various Sizes

Diameter-controlled Growth of Aligned Single-Walled Carbon Nanotubes on Quartz Using Molecular Nanoclusters As Catalyst Precursors

Selective Growth of Carbon Nanotube on Silicon Substrates

Patterned Growth of Vertically Aligned Carbon Nanotubes on Pre-patterned Iron/Silica Substrates Prepared by Sol−Gel and Shadow Masking

Using 0-dimensional silica to control diameter and density of carbon nanotubes

Controlled growth of carbon nanotubes in diameter and shape using template-synthesis method

Film growth of pillars of multi-walled carbon nanotubes

High-Density Growth of Single-Wall Carbon Nanotubes on Silicon by Fabrication of Nanosized Catalyst Thin Films

Growth of Straight Carbon Nanotubes by Simple Thermal Chemical Vapor Deposition

Synthesis of Aligned Carbon Nanotubes by Thermal Chemical Vapor Deposition

Growth of Carbon NanoStructures in Ceramic Materials

PATTERNED GROWTH OF SINGLE-WALLED CARBON NANOTUBES ON SILICON WAFER FOR ELECTRONIC DEVICES BY CHEMICAL VAPOR DEPOSITION PROCESS

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition