Abstract:Aircraft secondary flow systems are small-flow circulation devices that are used for thermal and cold management, flow control, and energy generation on aircraft. The aerodynamic characteristics of main-flow-based inlets have been widely studied, but the secondary-flow-based small inlets, jets, and blowing and suction devices have seldom been studied. Two types of secondary flow systems embedded in a supersonic aircraft wing, a ram-air intake and a submerged intake, are researched here. Firstly, wind tunnel tests under subsonic, transonic, and supersonic conditions are carried out to test the total pressure recovery and total pressure distortion. Secondly, numerical simulations are used to analyze the flow characteristics in the secondary flow systems. The numerical results are validated with experimental data. The calculating errors of the total pressure recovery on the ram-air and submerged secondary flow systems are 8% and 10%, respectively. The simulation results demonstrate that the total pressure distortion tends to grow while the total pressure recovery drops with the increasing Mach number. As the Mach number increases from 0.4 to 2, the total pressure recovery of the ram-air secondary flow system decreases by 68% and 71% for the submerged system. Moreover, the total pressure distortion of the ram-air and submerged secondary flow systems is increased by 19.7 times and 8.3 times, respectively. Thirdly, a detailed flow mechanism is studied based on the simulation method. It is found that the flow separation at the front part of the tube is induced by adverse pressure gradients, which primarily determine the total pressure recovery at the outlet. The three-dimensional vortex in the tube is mainly caused by the change in cross-sectional shape, which influences the total pressure distortion.

Experimental Investigation of the Supercritical Airfoil Transonic Characteristics

Numerical Study of Active Shock Control for Transonic Aerodynamics

Supercritical Wing Design and Optimization for Transonic Civil Airplane

Design and Optimization of Three-Dimensional Supersonic Asymmetric Truncated Nozzle

Optimization Design for Supersonic Inlet Structure Parameter

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Investigation on Transition Characteristics of a Modified RAE5243 Airfoil

Experimental Investigation on Forced Boundary-Layer Transition in Shock Tunnel

Supercritical wing design based on airfoil optimization and 2.75D transformation

Numerical and Experimental Investigation of a NACA 64A-110 Airfoil in Transonic Flow Regime

Experimental Investigation of the Performance of a Novel Ejector–Diffuser System with Different Supersonic Nozzle Arrays

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

Study on Aerodynamic Optimal Super/transonic Turbine Cascade and Its Geometry Characteristics

Aerodynamic Design Method and Experimental Investigation of a High-Load Supersonic Compressor Cascade

Experimental investigation on the aerodynamic performance of a transonic turbine rotor with non-axisymmetric endwall

Wind Tunnel Experiment and Numerical Simulation of Secondary Flow Systems on a Supersonic Wing

Fixed Boundary transition effect on transport aircraft aerodynamic characteristics under different Reynolds numbers

Numerical Investigation on the Transition Flow around NLF Airfoil

Numerical Study of a Supercritical Airfoil/wing with Variable-Camber Technology

The Drag Reduction Study of the Supercritical Airfoil with Shock Control Bump Considering the Robustness