Abstract:The drag-reduction spike is widely employed in the testing of hypersonic vehicles owing to its remarkable ability to reduce drag and heat. Further investigation into the aeroelastic characteristics and mechanisms of the drag-reduction spike will offer a valuable reference for the refined design of its aerodynamics and structure. In this paper, based on the in-house high-order accurate CFD/CSD coupling analysis method, the variation law and mechanism of the nonlinear aeroelastic characteristics of the drag-reduction spike under different Mach numbers and dynamic pressures are studied. The results indicate that the nonlinear dynamic response of the drag-reduction spike transitions from limit cycle oscillations to more complex oscillatory characteristics as the Mach number increases from 2.0 to 5.0. Simultaneously, it is observed that the amplitude of the structural response also increases correspondingly. The primary factor contributing to this phenomenon is the elevated Mach number, which intensifies the interaction of unsteady aerodynamic loads on the surface of the spike. As a result, the location of the separation points and the structure of the separation vortex on the upper and lower surfaces become significantly asymmetric. Furthermore, as the dynamic pressure increases, the nonlinear dynamic response transitions from a complex characteristic to a stable limit cycle oscillation, accompanied by a corresponding increase in the structural amplitude. In both cases, the dynamical characteristics are mainly dominated by the first-order bending mode, and the vibration frequency remains consistent over time. Besides, the variation law of the flow field with the oscillation of the drag-reduction spike is summarized. As the spike is displaced, the complexity of the separation vortex and the intensity of the reattachment shock wave on the offset side gradually decrease, while the reverse is true on the other side. Meanwhile, a vortex is generated on the blunt body on the offset side of the spike, and the vortex region becomes larger as the offset increases.

The Drag Reduction Study of the Supercritical Airfoil with Shock Control Bump Considering the Robustness

Numerical Study of Active Shock Control for Transonic Aerodynamics

Investigation on Drag Reduction with Bump Located on a Supercritical Airfoil and Design Optimization of the Bump

Unsteady Simulation of Transonic Buffet of a Supercritical Airfoil with Shock Control Bump

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Numerical study of aerodynamic heating and shock detached distance for sharp leading edge

Using Shock Control Bumps to Improve Transonic Fan/Compressor Blade Performance

Effects of suction surface bump on turbine convergentdivergent rotor aerodynamic performance

Passage shock wave/boundary layer interaction control for transonic compressors using bumps

Supercritical Wing Design and Optimization for Transonic Civil Airplane

The Research of Robust Supercritical Airfoil Design Optimization

Robust Design Optimization of Supersonic Biplane Airfoil Using Efficient Uncertainty Analysis Method for Discontinuous Problem

Study on Trailing Edge Ramp of Supercritical Airfoil

Investigation of Shock Wave Control by Suction in a Supersonic Cascade

INDUCED DRAG REDUCTION OPTIMIZATION STUDY USING MULTI-CONTROL SURFACES FOR ELASTIC WING

Numerical investigation of shock oscillation in transonic buffeting flows

Research on the Relation of Cavitator Profile and Supercavity Drag Reduction

Numerical investigation of nonlinear aeroelastic characteristics of a supersonic drag-reduction spike

Numerical Research on Drag Reduction Characteristics of Supercavitating Body of Revolution

Study on Supersonic Jet Control with Spoiler Using Lagrangian Coherent Structures and Dilatation Gradient