Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

Modeling of Capacitive Micro Pressure Sensor Featuring Space-Continuous Behavior

The Terminal Behaviors Modeling Method for Complex Microsystems

Flexible Design Modeling Methodology for MEMS Based on Petri Net

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

A Capacitive Pressure Sensor with Adjustable Working Range for Deep Sea

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

Design of Force-Balance Capacitive Accelerometer

Modeling and Analysis of MEMS Capacitive Pressure Sensors with Vertical Comb Fingers

Modeling and Analysis of A Flexible Capacitive Tactile Sensor Array for Normal Force Measurement

A Verilog-A Model for Capacitive MEMS Accelerometers

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

A Modified Analytical Model to Study the Sensing Performance of a Flexible Capacitive Tactile Sensor Array

An Improved Capacitive Sensor for Detecting the Micro-Clearance of Spherical Joints

Simulation based Analysis of Capacitive Pressure Sensor with COMSOL Multiphysics

Efficient in-depth analysis and optimum design parameter estimation of MEMS capacitive pressure sensor utilizing analytical approach for square diaphragm

Design and Implementation of Vertically Integrated Deformable Hermetic Chambers for the Sensitivity Enhancement of CMOS-MEMS Capacitive Pressure Sensor

An efficient macro model for CMOS-MEMS thermal wind speed sensor

A Continuous-Time Voltage Readout for SiC Micromechanical Capacitive Pressure Sensor.

Capacitive Touch Sensor Modeling With a Physics-informed Neural Network and Maxwell's Equations

A Simulation Based Geometrical Analysis of MEMS Capacitive Pressure Sensors for High Absolute Pressure Measurement