Abstract:In the present work, a novel poly(arylene ether ketone) with a unique molecular design that included concentrated flexible sulfoalkyl groups and a silane cross-linked network (C-SPAEK) was prepared and used as a PEM for DMFCs. The chemical structures, sulfonation degree and phase-separated morphology were characterized and identified by 1 H NMR, FT-IR and SAXS. The resulting copolymers exhibited excellent thermal stability (T 5% >263.8 °C) and mechanical properties (tensile strength>52.88 MPa). Additionally, the high IEC values and obvious hydrophilic/hydrophobic phase-separated structure (d > 2.71 nm) ensured that the C-SPAEK membranes possessed high proton conductivities . The C-SPAEK PEMs also displayed enhanced methanol resistance and dimensional stability, which were much better than those of a recast Nafion membrane under the same conditions. The C-SPAEK-0.4 membrane maintained a low methanol absorption of less than 48.7%, even in 4 M methanol solution. In particular, the C-SPAEK-0.6 membrane exhibited the best comprehensive performance, with a high proton conductivity (0.164 S cm −1 ), low methanol uptake (52.1%) and permeability (3.63 × 10 −7 cm 2 s −1 ), and maximum power density (83.2 mW cm −2 ), when immersed in 2 M methanol at 80 °C in a DMFC single-cell. These results suggested that the C-SPAEK membranes were sufficiently tough and had the potential to overcome the problems caused by the high methanol permeability of PEMs. The unique molecular design of C-SPAEK guaranteed a rare combination of high proton conductivity and enhanced methanol resistance, which are the key determining factors for DMFC applications.

Layer-By-Layer Self-Assembly of Polyaniline on Sulfonated Poly(Arylene Ether Ketone) Membrane with High Proton Conductivity and Low Methanol Crossover

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Layer-By-Layer Self-Assembly of in Situ Polymerized Polypyrrole on Sulfonated Poly(Arylene Ether Ketone) Membrane with Extremely Low Methanol Crossover

Self-Assembly of Multiwall Carbon Nanotubes on Sulfonated Poly (arylene Ether Ketone) As A Proton Exchange Membrane

Highly Conductive, Methanol Resistant Fuel Cell Membranes Fabricated by Layer-By-Layer Self-Assembly of Inorganic Heteropolyacid

Layer-by-layer Self-Assembly of PDDA/PWA-Nafion Composite Membranes for Direct Methanol Fuel Cells.

SPEEKK/polyaniline (PANI) Composite Membranes for Direct Methanol Fuel Cell Usages

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Low Water Swelling and High Methanol Resistant Proton Exchange Membrane Fabricated by Cross-Linking of Multilayered Polyelectrolyte Complexes

Analyses of scanning electrochemical microscopy and electrochemical impedance spectroscopy in direct methanol fuel cells: permeability resistance and proton conductivity of polyaniline modified membrane

High Dimensional Stability and Alcohol Resistance Aromatic Poly(aryl Ether Ketone) Polyelectrolyte Membrane Synthesis and Characterization

Preparation of Novel Polyaniline and Phosphoric Acid Doped Sulfonated Polybenzimidazole Composite Membranes for Fuel Cells

Considerations of the Effects of Naphthalene Moieties on the Design of Proton-Conductive Poly(Arylene Ether Ketone) Membranes for Direct Methanol Fuel Cells

Nafion(R)/PANI Composite Membranes by in Situ Polymerization for Direct Methanol Fuel Cell

Preparation of a Cross-linked Sulfonated Poly(arylene ether ketone) PEM with Enhanced Proton Conductivity and Methanol Resistance by Introducing Ionic Liquid Impregnated MOF.

Effects of Microstructural Functional Polyaniline Layers on SPEEK/HPW Proton Exchange Membranes

Blend Membranes Based on Disulfonated Poly(Aryl Ether Ether Ketone)S (speek) and Poly(Amide Imide) (pai) for Direct Methanol Fuel Cell Usages

Surface Modification of Heteropoly Acid/speek Membranes by Polypyrrole with a Sandwich Structure for Direct Methanol Fuel Cells

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications

Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Sulfonated Poly(Arylene Ether Ketone)S Prepared by Direct Copolymerization As Proton Exchange Membranes: Synthesis and Comparative Investigation on Transport Properties