Abstract:Chemi-thermo-mechanical pulping (CTMP) wastewater has high chemical oxygen demand (COD), which inhibits the activity of microorganisms during biological oxidations. Conventional wastewater treatment technologies such as dissolved air flotation, coagulation, and biological treatment, are insufficient to treat the CTMP wastewater to meet the environmental requirements. There remains a need for advanced wastewater treatment technologies, which can be integrated into existing wastewater treatment processes to improve the end-of-pipe water quality. In this study, a heterogeneous electrochemical oxidation process was developed to treat chemi-thermo-mechanical pulp mill wastewater. The Ti substrate anodes were prepared by thermal decomposition and electro-deposition, and characterized by SEM and Tafel curve. The impacts of electrode modification, flowrate, current density, and aeration on the process efficiency were investigated. COD and color density were used to evaluate the removal efficiency of organic pollutants. Results show that the Ti/SnO 2 +Sb 2 O 3 +MnO 2 /PbO 2 electrode exhibited the best performance in terms of COD and color removal efficiency. SEM observation revealed that the electrode surface was smooth and compact, with numerous uniform micro pores of which the inner walls were covered with tiny crystals. Under the studied conditions, color removal reached 90%, while COD removal was about 60%.

Study on the CODcr removal efficiency from printing & dyeing wastewater by electrochemical process

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Electrochemically Treatment of Textile Wet Processing Effluents

Treatment of Printing and Dyeing Wastewater by DC Electrocoagulation Method

STUDY ON FENTON OXIDATION FOR TREATING ELECTROPLATING ORGANIC WASTEWATER

The Treatment of Printing and Dyeing Wastewater by Using Coagulation and Fenton Reagent Oxidation Combined Process

THE EXPERIMENTAL STUDY ON TREATING DYEING WASTEWATER WITH COAGULATION-CONTACT OXIDATION PROCESS

Research on dispose of wastewater from printing and dyeing by CWF combined with Iron-carbon Microelectrolysis

High Concentration Dyeing Waste Water Pretreatment by Fe-C Micro-Electrolysis

STUDY FOR REUSE OF TREATED WATER FOR DYEING WASTEWATER

Study on Treatment of Dyeing Wastewater by DC Electrocoagulation Method

Experimental Study on Papermaking Wastewater by Advanced Electrochemical Oxidation Method

PILOT SCALE STUDY ON PRINTING AND DYEING WASTEWATER TREATMENT WITH IRON-CARBON MICROELECTROLYSIS-BIOFILM-ADVANCED OXIDATION PROCESS

Study on the Removal Efficiency of Stubborn COD in Pulping Wastewater by Fenton Oxidation

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Experimental study on the treatment of high COD metal degreasing cleaning wastewater by coagulation and two-stage Fenton oxidation

TREATMENT OF PRINTING AND DYEING WASTEWATER BY CATALYZED IRON INNER ELECTROLYSIS METHOD

Pre-treatment of wastewater from Li battery cathode material production by the Fe/C micro-electrolysis-Fenton method

Dye Wastewater Treatment by Combined Fe/Cu Internal Electrolysis and UV/Fenton Catalytic Oxidation Process