Abstract:Textile wastewater, laden with persistent dyes and non-biodegradable organics, poses a challenge for treatment in common effluent treatment plants (CETPs) using conventional methods. Pre-treatment of textile effluents is essential to ensure compatibility with CETPs. The present study employed three-dimensional (3D) aluminum and graphite electrodes for a sequential electro-coagulation and electro-Fenton (EC + EF) process. An experimental plan of 25 experiments was constructed using Taguchi method. The combination resulted in high removal efficiencies: 99.91% for color, 93.20% for chemical oxygen demand (COD), and 91.75% for total organic carbon (TOC) for the operating parameters; for EC, current density (J): 20 mA/cm2, time (t): 45 min, speed of rotation (N): 55 rpm; and for EF, current density (J): 25 mA/cm2, time (t): 50 min, iron concentration: 40 mg/L. Post-treatment, the wastewater exhibited an enhanced biodegradability index of 0.875, rendering it suitable for CETPs. There was an increase of 11% in the total energy consumption when energy spent during rotation and aeration at the time of EC and EF, respectively, were considered. This energy increases the cost and is not accounted for, in previous research. The energy consumption in kWh per g of COD removed at optimum condition for the hybrid treatment was 0.0314, which is lower than the energy consumption by other electrochemical processes employing plate electrodes. This indicates that 3D electrodes are more energy efficient than plate electrodes. PRACTITIONER POINTS: Hybrid electrochemical processes can be used as pre-treatment method for textile effluents. Three-dimensional electrodes improve removal rates with lower energy consumption. Significant color, COD, and TOC abatement were noted post-hybrid treatment of textile wastewater. Biodegradability of the textile effluent improves after the hybrid treatment.

Electrochemically Treatment of Textile Wet Processing Effluents

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Continuous Treatment of Biologically Treated Textile Effluent Using a Multi-Cell Electrochemical Reactor

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Study on the CODcr removal efficiency from printing & dyeing wastewater by electrochemical process

Electrochemical Treatment of a Real Textile Wastewater Using Cheap Electrodes and Improvement in Cod Removal

Treatment of Printing and Dyeing Wastewater by DC Electrocoagulation Method

Treatment of Dye Wastewater with Electrochemical Oxidation Process and Ferric Coagulation Process

Pretreatment of High-Strength Unbiodegradable Dye Wastewater with Electrolysis Processes

Sequential electro-coagulation and electro-Fenton processes for the treatment of textile wastewater

Advanced Treatment of Effluent from Washing and Bleaching Processes Using Packed Bed Electrochemical Reactor

Electrolysis Using Carbon Electrodes to Treat Textile Wastewater for Chemical Oxygen Demand, Turbidity and Colour

Pre-Treatment of Organic-High Refractory Dyestuff Wastewater with Electrolysis Processes

Treatment of dyeing wastewater with ACF electrodes1Financially supported by The State Key Laboratory of Environmental Aquatic Chemistry, Chinese Academic of Sciences.1

Study on treatment of dyeing wastewater by combined process of biological micro-electrolysis

Treatment of dyeing wastewater with ACF electrodes 1 Financially supported by The State Key Laborato

Dyeing and Finishing Wastewater Treatment Using Hydrolysis-acidification/Aerobic Bio-oxidation/Coagulation/Air Flotation Process

Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater

STUDY ON DYEING WASTEWATER TREATMENT BY APPLICATION OF ELECTRO-CHEMICAL METHOD

Electrochemical Degradation of Textile Effluent Using PbO 2 Electrode in Tube Electrolyzer