Abstract:In this paper dyeing waste water was simulated by reactive brilliant blue XBR, activated carbon adsorption process, coagulation process and chemical oxidation process were used to treat dyeing waste water. In activated carbon adsorption process and coagulation process, the water absorbance values were measured. The CODcr value of water was determined in Fenton chemical oxidation process. Then, the decolorization rate and COD removal rate were calculated respectively. The results showed that the optimum conditions of activated carbon adsorption process were as follows: pH=2, the dosage of activated carbon was 1.2g/L, the adsorption reaction time was 60 min, and the average decolorization rate of the three parallel experiments was 85.30%. The optimum conditions of coagulation experiment were as follows: pH=8~9, PAC dosage was 70mg/L, stirring time was 20min, standing time was 45min, the average decolorization rate of the three parallel experiments was 74.48%. The optimum conditions for Fenton oxidation were Fe2+ 0.05g/L, H2O2 (30%) 14mL/L, pH=3, reaction time 40min. The average CODcr removal rate was 69.35% in three parallel experiments. It can be seen that in the three methods the activated carbon adsorption treatment of dyeing wastewater was the best one.

THE EXPERIMENTAL STUDY ON TREATING DYEING WASTEWATER WITH COAGULATION-CONTACT OXIDATION PROCESS

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Study on the coagulation treatment of activated dye wastewater

Experimental Study on Treatment of Dyeing Wastewater by Activated Carbon Adsorption, Coagulation and Fenton Oxidation

The Treatment of Printing and Dyeing Wastewater by Using Coagulation and Fenton Reagent Oxidation Combined Process

The Practice and Discussion on the Improvement of the Process for Printing and Dyeing Wastewater Treatment

Study on Hair Dyeing Wastewater Treatment by the Union Process of Adsorption Coagulation and Potassium Permanganate Oxide

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Enhanced Treatment of Dyeing Wastewater by Homogeneous Phase Fenton Oxidation-Coagulation Process

Pilot scale study on dyeing wastewater treatment with coagulation/catalytic oxidation/hydrolytic acidification/biological contact oxidation

Study on Treatment of Compositive Dyeing and Printing Wastewater by Chemical Coagulation

Advanced Treatment of Printing and Dyeing Wastewater by Adsorption Concentration-Fenton Oxidation Process

STUDY ON DECOLOURIZATION OF ACTIVETED DYEING WASTEWATER BY ORGANIC FLOCCULANT-PDMDAAC

Study on the CODcr removal efficiency from printing & dyeing wastewater by electrochemical process

Pilot-scale Study on Advanced Treatment of Printing and Dyeing Wastewater by Coagulation Process

Studies on Treating the Printing and Dyeing Wastewater with the Ferrate Oxidization and Photochemical Process

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Treatment of dyeing wastewater by hybrid processes of biological oxidation and ozonation

Treatment of Dye Wastewater with Electrochemical Oxidation Process and Ferric Coagulation Process