Abstract:Diamond-like carbon (DLC) films exhibit exceptional tribological characteristics, but their practical application requires the development of scalable methods for uniform film deposition. For large-area DLC films, the properties of films deposited at different positions may be different, it is necessary to study the uniformity of DLC films. In this study, Si-containing DLC (Si-DLC) films were deposited by mesh hollow cathode discharge. The uniformity of the microstructure and mechanical properties of the DLC films deposited in the x, y, and z directions were studied. The Si-DLC films were characterized by scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and nanoindentation tests. The wear resistance was evaluated using a ball-on-disk tester and the wear scars were studied using a metalloscope. The thickness distributions of the Si-DLC films deposited in the x, y, and z directions exhibited thick middles and thin edges. However, the thickness distributions of the films deposited in the x and y directions were more uniform than the films deposited in the z direction. Compared with the films deposited in the z direction, the intensity ratio of the D and G peaks in the Raman spectra, the ratio of sp(3) and sp(2) carbons, the shift of the G peak position, and the full width at half maximum of the G peak of the films deposited in the x and y directions varied in a smaller range. Furthermore, the hardness, friction coefficient, and tribological performance of the films deposited in the x and y directions showed better uniformity than those of the films deposited in the z direction. Overall, mesh hollow cathode discharge provides good uniformity for films deposited in the x and y directions, but improved film deposition in the z direction is required. The study of the uniformity of Si-DLC films deposited at different positions by mesh hollow cathode discharge is benefit for understanding the working rule of mesh hollow cathode discharge, so as to prepare larger area and more uniform DLC film.

Self-Organized Synthesis of Micrometer Scale Silver Disks by Electroless Metal Deposition on Si-Incorporated Diamond-Like Carbon Films

Self-organized Synthesis of Silver Dendritic Nanostructures Via an Electroless Metal Deposition Method

Si nanowires sheathed with thin diamondlike carbon films

Intergrowth Mechanism of Silicon Nanowires and Silver Dendrites

Fabrication of Silver Nanowires in Situ in Si Chip Based on a Novel Electrochemical Method

Self-assembled Synthesis of SERS-active Silver Dendrites and Photoluminescence Properties of a Thin Porous Silicon Layer

Self-Assembly Mechanism Of Platelike Silver Mesocrystal

Dendrite-Assisted Growth of Silicon Nanowires in Electroless Metal Deposition

Phase-controlled Synthesis of Nickel Silicide Nanostructures

Electrodeposition Of Diamond-Like Amorphous Carbon Films On Si From N,N-Dimethylformamide

Growth of Zirconium Silicide Nanostructures on Vicinal and Flat Si(111)-7 × 7 Surfaces

Self-Organization of Ordered Silver Nanocrystal Arrays on Cubic Mesoporous Silica Surfaces

From Si Nanotubes to Nanowires : Synthesis, Characterization, and Self-Assembly

Electroless Silver Deposition on Si(100) Substrate Based on the Seed Layer of Silver Itself

Characterisation of Diamond-like Carbon Films Prepared by Electrochemical Deposition

Uniformity of Si-containing Diamond-Like Carbon Films Deposited at Different Positions by Mesh Hollow Cathode Discharge

Deposition and wettability of silver nanostructures on Si(1 0 0) substrate based on galvanic displacement reactions

Silver dendritic nanostructures formed at the solid/liquid interface via electroless deposition

Controllable growth of silver nanostructures by a simple replacement reaction and their SERS studies

Micro-nanoscale binary structured silver films fabricated by electrochemical deposition

Self-Organization of Semiconductor Nanocrystals by Selective Surface Faceting