Abstract:Magnetostrictive Fe-Ga alloys, featuring with good machinability, high Curie temperature, and high permeability, have received increasing attention in fields such as actuators, implants, and energy harvesting. Unfortunately, bulk polycrystalline Fe-Ga alloys usually suffer poor magnetostrictive strains compromised by the randomness of grain structure and the intricate phase constitution. The current study was centered on the fabrication of bulk polycrystalline Fe81Ga19 alloys with tailored grain morphology and phase arrangement utilizing laser-beam powder bed fusion (LPBF) technology. Particular emphasis was laid on investigating the repercussions of LPBF process parameters on the microstructure and magnetostrictive performance. The findings illustrated a non-linear interplay between laser power and the relative density of laser powder bed fusion-fabricated (LPBFed) Fe81Ga19 alloys, marked by an initial augmentation followed by a subsequent decrement. Similarly, a consistent trend was observed for the LPBFed alloys at varying scan speeds. In particular, the LPBFed Fe81Ga19 alloys exhibited a highest density at optimized process parameters (laser power set at 120 W paired with a scan speed of 100 mm s(-1)) due to suitable laser energy input during LPBF process. It was experimentally shown that elongated columnar grains and disorder A2 phase structures were obtained within the alloys attibutes to the high temperature gradient and rapid cooling kinetics intrinsic to LPBF, contributing to a desirable magnetostrictive strain of similar to 87 ppm for bulk polycrystalline Fe81Ga19 alloys. Moreover, a good dynamic magnetostrictive response of the LPBFed alloys was confirmed by the near-synchronous variations between magnetostrictive behavior and alternating magnetic fields. It can be derived from these findings that LPBF process may be a promising method to prepare bulk magnetostrictive Fe-Ga alloys for versatile applications.

Large Linear and Volume Magnetostriction in Fe-Ga Alloys

Volume Magnetostriction of Fe81(Ga1−xGex)19 Alloys

Large magnetostriction in directionally solidified FeGa and FeGaAl alloys

Crystal growth of high magnetostrictive polycrystalline Fe 81Ga 19 alloys

Effect of the Growth Velocity on Microstructure, Orientation, and Magnetostriction in Fe81Ga19 Alloy

Giant Heterogeneous Magnetostriction in Fe–Ga Alloys: Effect of Trace Element Doping

001 > Oriented Single Crystal Growth and Magnetostriction of Fe81ga19 Alloys

Understanding the Intrinsic Mechanism of the Giant Magnetostriction in Binary and Alloyed FeGa Solid Solutions

Crystal Growth Of Fe81ga19 Alloy And Its Magnetostrictive Properties - Art. No. 64234u

Local Inhomogeneous Structural Origin of Giant Magnetostriction in Fe-Ga Alloys

Crystal Growth of Fe 81 Ga 19 Alloy and Its Magnetostrictive Properties

Magnetostriction Increase of Tb0.3dy0.7fe1.95 Alloy Prepared by Solidification in High Magnetic Fields

Improved magnetostriction in Galfenol alloys by aligning crystal growth direction along easy magnetization axis

Laser-beam powder bed fusion of magnetostrictive Fe 81 Ga 19 alloys: parameter optimization, microstructural evolution and magnetostrictive properties

Understanding Strong Magnetostriction in Fe100−xGax Alloys

Joule magnetostriction and volume magnetostriction of Iron Gallium thin films

Evolution of nanoheterogeneities and correlative influence on magnetostriction in FeGa-based magnetostrictive alloys

An Approach To The Bulk Textured Fe81ga19 Rods With Large Magnetostriction

Structural Investigations of Fe-Ga Alloys by High-Energy X-Ray Diffraction

Laser-beam Powder Bed Fusion of Magnetostrictive Fe81Ga19 Alloys: Parameter Optimization, Microstructural Evolution and Magnetostrictive Properties

Multiscale Influence of Trace Tb Addition on the Magnetostriction and Ductility of 〈100〉 Oriented Directionally Solidified Fe-Ga Crystals