Abstract:Time-dependent plastic deformation, also known as creep, can occur in high-melting-point materials at room temperature when subjected to submicron plastic contact (e.g., components in micro-electronic mechanical systems) due to the extremely high stress conditions. Previous investigations of creep behavior at submicron scale mainly focus on uniform microstructures, whereas recently developed high-performance structural materials usually show complex microstructural heterogeneities. Here, we demonstrate a high-throughput nanoindentation approach to unveil the creep behavior of locally diverse microstructures, via a case study on an interstitial high-entropy alloy (iHEA). The prototype iHEA specimen was firstly pre-strained by severe cold-rolling to achieve diverse microstructure features including dense dislocations, nanotwins and nanograins. Nanoindentation mapping with 144 indents is conducted to collect creep data from all types of diverse microstructures, followed by systematical calculations based on power-law analysis. Then intuitive contour maps of nanohardness (H), strain rate (ε ̇) and stress exponent (n) are attained. The individual creep mechanism of each microstructure variant is evaluated by correlating local microstructure features with corresponding creep responses from these contour maps. With the increase of n value for different sample regions, the ε ̇ value inversely reduces and the corresponding dominant creep mechanism gradually converts from diffusion-mediated mode to dislocation-controlled one. The presence of nanograins and nanotwins significantly hinders dislocation interactions and promotes stress-induced diffusion. This work verifies that nanoindentation creep behavior is highly correlated with local microstructure features, and the mapping approach is feasible for evaluating creep-resistance of locally diverse microstructures under extremely high-stress conditions.

Incorporation of Peierls Stress into Deformation Mechanism Maps

On The Transitions Among Different Creep Regimes

Dislocation dynamics modelling of the creep behaviour of particle-strengthened materials

On Newtonian Viscoplastic Dislocation Creep and the Effect of the Peierls Stress

Deformation Mechanism in the Mg-Gd-Y Alloys Predicted by Deformation Mechanism Maps

Deformation mechanism maps for sub-micron sized aluminum

A Crystal Plasticity-Based Creep Model Considering the Concurrent Evolution of Point Defect, Dislocation, Grain Boundary, and Void

Establishment of a steady dislocation density by the Peierls stress in Harper-Dorn creep

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

Dependence of dislocation density in Harper-Dorn creep on the peierls stress

An Atomistic Study of Diffusion-Mediated Plasticity and Creep using Phase Field Crystal Methods

An Investigation of the Deformation Mechanism in Grain Size-Sensitive Newtonian Creep

Dislocation-Evolution Based Comprehensive Phenomenological Model for Continuum-Scale Description of Stress–Strain and Work-Hardening Behavior

Predicting the flow stress and dominant yielding mechanisms: analytical models based on discrete dislocation plasticity

Development of a Micromechanic Theory of Constitutive Relations of Polycrystalline Solids

A new thermodynamically based model for creep and cyclic plasticity

Mechanism-based strain gradient crystal plasticity—I. Theory

Comments on the internal stress model of Harper-Dorn creep

A Nucleation Rate Limited Model for Grain Boundary Creep

Spatial fluctuations in transient creep deformation

Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping