Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Construction of an N-Body Cu–Ta Potential and Study of Interfacial Behavior Between Immiscible Cu and Ta Through Molecular Dynamics Simulation

Interface Stability and Solid-State Amorphization in an Immiscible Cu-Ta System

Amorphous Alloy Formation in Immiscible Cu-Ta and Cu-W Systems by Atomistic Modeling and Ion-Beam Mixing

Atomistic Modeling of Solid-State Amorphization in an Immiscible Cu-Ta System

Metastable phase formation in an immiscible Cu-Ta system studied by ion-beam mixing, ab initio calculation, and molecular dynamics simulation

Structural and Dynamical Properties of Heterogeneous Solid–liquid Ta–Cu Interfaces: A Molecular Dynamics Study

Interfacial Reaction of W/Cu Examined by an N-Body Potential Through Molecular Dynamics Simulations

Modulation of electronic state in copper-intercalated 1T-TaS 2

Construction of an n-Body Potential for Revealing the Atomic Mechanism for Direct Alloying of Immiscible Tungsten and Copper

Influence Of Interfacial Texture On Solid-State Amorphization And Associated Asymmetric Growth In Immiscible Cu-Ta Multilayers

Orientation Dependences of Atomic Structures in Chemically Heterogeneous Cu50ta50/Ta Glass-Crystal Interfaces

Glass Forming Region of Cu-Ti-Hf Ternary Metal System Derived from the N-Body Potential Through Molecular Dynamics Simulation

Interaction of He with Cu, V, and Ta in Bcc Fe: A First-Principles Study

Calculation of Phonon Spectra to Predict the High-Pressure Metastable Phase in an Equilibrium Immiscible Cu–Ta System

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Construction Of An Embedded-Atom Potential For An Immiscible Cu-V System

Development of N-Body Potentials for Hcp–bcc and Fcc–bcc Binary Transition Metal Systems

Metastability Of An Immiscible Cu-Mo System Calculated From First-Principles And A Derived N-Body Potential

Construction of an Embedded-Atom Potential for an Immiscible Cu–V System

Proposed long-range empirical potential to study the metallic glasses in the Ni-Nb-Ta system

Experimental Investigation and Thermodynamic Modelling of the Fe-Ni-Ta System