Abstract:The electron beam wire-feed additive manufacturing (EBAM) technology utilizes a high-energy electron beam as a heat source to bombard a metal wire in the vacuum environment to form a molten pool. The stability and quality of the deposition mainly depend on the transition behavior of the droplet. To conduct this research, a high-fidelity thermo-fluid dynamic simulation model based on the local reconstruction of the 3D model was developed and verified. The model used the Monte-Carlo algorithm to update the scattering trajectories and residual energies of high-energy electrons on the irradiated surface of the wire and molten pool at each time step in the numerical calculation. Quantitatively analyzed the "electron-wire" instantaneous energy coupling mechanism in the droplet transition mode, insertion transition mode, and liquid bridge transition mode, and finally established an energy-matching criterion for maintaining a stable deposited track morphology. The results show that during the initial stage of wire melting, the droplet will climb along the wire feeding direction, grow under gravity, and eventually drop under the combined effects of gravity and recoil pressure. Different forms of molten droplets will form various solidification morphology, with the liquid bridge transition mode being the most desirable. To maintain a stable liquid bridge transition, it is necessary to control the droplet generation height within the range of 0-2.7 mm. The collapse of the deposited track, caused by heat accumulation during the multilayer deposition, would also alter the droplet generation height. Therefore, to maintain the liquid bridge transition mode in the multilayer multi-channel forming process, it is also necessary to ensure that the energy density of the deposited track is slightly greater than 1.16x1010 J/m3 and the energy density of the wire is slightly greater than 2.63x1010 J/m3.

Heat Transfer Model of Electron Beam Curing Composites During Manufacturing

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

Simulation and Modeling of Polymeric Composite Temperature Change During Manufactory Process

Thermal Management for Thermoset Automated Fiber Placement Based on Infrared Heater Structure Arrangement

Electron Beam Curing of Advanced Composites

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Multiscale Modeling of Electron Beam and Substrate Interaction: a New Heat Source Model

Numerical Simulation of Temperature Distribution in the Glass Fiber Epoxy Composites during Microwave Curing

Hybrid particle-thermodynamic model and experimental validation of multi-track periodical heating during electron beam treatment

Study on the process of EB curing epoxy matrix composites

An Analytic Approach for the Temperature and Strain Fields of Composite Laminate Curing on A Solid Mold

Numerical Prediction of Temperature Distribution in Thermoset Composites During Laser Curing Process

Finite Element Modeling of Curing of Epoxy Matrix Composites

Simulation of Curing Process of Composite Component with Internal Metallic Mold

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Numerical Simulation Research on Curing Process of Composite Overwrap Considering A Die Model

Heat and Mass Transfer in Electron Beam Additive Manufacturing

Finite Element Simulation of Cure of Thick Composite: Formulations and Validation Verification

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture