Abstract:In the process of injection molding, the vacuum pump rear housing is prone to warping deformation and volume shrinkage, which affects its sealing performance. The main reason is the improper control of the injection process and the large flat structure of the vacuum pump rear housing, which does not meet its production and assembly requirements (the warpage deformation should be controlled within 1.1 mm and the volume shrinkage within 10%). To address this issue, this study initially utilized orthogonal experiments to obtain training samples and conducted a preliminary analysis using gray relational analysis. Subsequently, a predictive model was established based on a one-dimensional convolutional neural network (1D CNN). Input parameters from the injection molding process, including melt temperature, mold temperature, packing pressure, packing time, injection pressure, injection time, and cooling time, were used while warping deformation and volume shrinkage were considered as outputs. Global optimization was performed using the non-dominated sorting genetic algorithm II (NSGA-II), and the optimal combination of process parameters was evaluated using the criterion importance through intercriteria correlation—technique for order preference by similarity to ideal solution (CRITIC-TOPSIS). Moldflow analysis demonstrated that the obtained indicators outperformed the optimization results from orthogonal experiments, confirming the effectiveness of the injection molding process parameter optimization method based on 1D CNN-NSGA-II. In comparison to the pre-optimization results, product warping deformation decreased by 40.68%, and volume shrinkage reduced by 18.14%, and all of them meet the production requirements.

On-line Control System of Part Mass During Plastic Injection Molding Based on Neural Network

Research and Application of Advanced Process Control for Plastic Injection Molding Machine Temperature

Research on Velocity Control in Precise Injection Molding Based on RBF Neural Network

Adaptive adjustment of plastic injection processes based on neural network

Product Quality Prediction Method for Injection Molding Process Based on Operating Mode Recognition

Multi-objective Intelligent Optimization of Injection Molding Parameters Based on BP-NSGA

Artificial neural network-based online defect detection system with in-mold temperature and pressure sensors for high precision injection molding

Research on BP Neural Network Intelligent Control of Injection Moulding Product Quality

Adaptive PID Controller Based on Neural Networks in Stretch Blow Molding

Neural Network Approach to Predict Melt Temperature in Injection Molding Processes

Melt temperature learning control of injection molding process based on CMAC neural network

Modeling of Melt-flow-length During Injection Filling Stage Based on Dynamic Neural Network Soft-sensor

Design Of Model Predictive Controller Based On Neural Systems

Deformation Forecast in Numerical Control Milling Based on Artificial Neural Networks

Quality Prediction for Injection Molding by Using a Multilayer Perceptron Neural Network

Application of Different Neural Network on Injection Molding Process Parameters

Multi-objective Optimization of Injection Molding Process Based on One-Dimensional Convolutional Neural Network and the Non-dominated Sorting Genetic Algorithm II

Adaptive particle swarm optimization-based neural network in quality prediction for plastic injection molding

A Study on the Architecture of Artificial Neural Network Considering Injection-Molding Process Steps

Optimization of Process Parameters for Thin Plastic Shell Injection Molding Based on Neural Network and Genetic Algorithm

Ram Velocity Control in Plastic Injection Molding Machines with Neural Network Learning Control