Abstract:Injection molding is one of the polymer molding methods. Product quality mainly can be affected by temperature and pressure. To observe the process of the melt forming in the mold, it is required to monitor the signal with the sensor. To achieve the purpose of robust molding, this research provides a new design-process window architecture based on machine learning of the injection product quality assessment. The process window is also known as the forming area map. The monitored value for defective products will be above or below the variable limit. The process is set to the center of this window so that any variation within the window will still result in an acceptable product. There are some potential problems in the current process. First, the conventional process window uses a small number of process variables as monitoring indicators, and it cannot provide stronger monitoring indicators. Second, most of the conventional process windows are 2-D and there are many monitoring windows, so the information that can be monitored is limited. Therefore, product quality cannot be effectively monitored without proper selection of important factors. Finally, the current process window can only provide information in the process and cannot make product quality prediction. In order to solve the above problems, a machine learning method is proposed to design the process window. The random forest classifier and regressor are used to predict the product quality. In order to improve the usability of the factor, the design of the proposed new variable is derived from the classical formula of thermodynamics (heat conduction). Using existing factors and proposing time-based feature changes can better represent the molding process as a whole. Based on the experimental results, the proposed variables can effectively increase the predictive performance of random forest model for quality assessment. The research results make a satisfactory result to the quality assessment of industria- injection molding. The accuracy of the prediction results is 100%. Moreover, it can be found from the 3-D process window that the data are very concentrated and can be clearly classified by the hyperplane, which is defined as the shortest distance between two clusters, and this space is the boundary of the process window. Therefore, compared with the past, the judgment boundary based on the random forest process window is no longer a simple boundary. Random forests can provide more accurate visualization boundaries.

Modeling of Melt-flow-length During Injection Filling Stage Based on Dynamic Neural Network Soft-sensor

Numerical simulation of filling flow of polymer melt in injection molding

A Soft-Sensor Development for Melt-Flow-Length Measurement During Injection Mold Filling

An On-Line Measurement Scheme Of Melt-Front-Area During Injection Filling Via A Soft-Sensor Implementation

Neural Network Approach to Predict Melt Temperature in Injection Molding Processes

Quality Prediction for Injection Molding by Using a Multilayer Perceptron Neural Network

Artificial neural network-based online defect detection system with in-mold temperature and pressure sensors for high precision injection molding

Parameters Optimization of Short Fiber-Reinforced Composites Injection Molding By the Combining Neural Network and Genetic Algorithm

Study on Rheological Properties of In-Mold Co-Injection Self-Reinforced Polymer Melt

Quality-Sensitive Feature Extraction for End Product Quality Prediction in Injection Molding Processes

Predicting and Controlling the Quality of Injection Molding Properties for Fiber-Reinforced Composites

Profiling of Injection Velocity for Uniform Mold Filling

Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network

A Novel Sensing Feature Extraction Based on Mold Temperature and Melt Pressure for Plastic Injection Molding Quality Assessment

Computer Evaluation of Weld Lines in Injection-molded Parts

Melt temperature learning control of injection molding process based on CMAC neural network

On-line Control System of Part Mass During Plastic Injection Molding Based on Neural Network

Development of e-Dart-based artificial neural network for multiple quality characteristic online defect detection system in injection molding processes

Multi-quality prediction of injection molding parts using a hybrid machine learning model

Shrinkage prediction of injection molded high density polyethylene parts with taguchi/artificial neural network hybrid experimental design

Modeling of mold filling in lost foam casting based on artificial neural network method