Abstract:ECG recorders are precision medical devices, but their thin-walled shells are susceptible to warpage and shrinkage during injection molding production due to the injection molding process, which greatly shortens their service life. To address this problem, a multiobjective optimization method for injection molding process parameters based on a combination of a BP neural network model optimized by an ant colony algorithm (ACO-BP) and an improved non-dominated sorting genetic algorithm (NSGA-II) is proposed. The study takes the warpage deformation amount and volume shrinkage rate of the plastic part as the optimization objectives, and the melt temperature, mold temperature, injection pressure, holding pressure, holding time, and cooling time as the design variables. However, for BP neural networks, it is crucial to choose an appropriate number of hidden layer neurons, so the particle swarm algorithm combined with the grey wolf algorithm (GWO-PSO) is used to solve for the optimal number of hidden layer neurons. Firstly, the number of hidden layer neurons of the BP network model was solved based on the samples obtained from the Box–Behnken experimental design and the GWO-PSO algorithm, and the ACO-BP algorithm was used to build the prediction models for warpage and volume shrinkage, respectively, and then combined with NSGA-II for global optimisation. The pareto optimal solution set was subjected to CRITIC analysis and the optimal process parameters were finally obtained, with a minimum warpage of 0.3293 mm and minimum volume shrinkage of 4.993%, a reduction of 8.93 and 6.95% respectively compared to the pre-optimisation period. At the same time, injection molding tests were carried out on the optimum process parameters, and it was found that the molding quality of the plastic parts was better and met the actual production requirements through measurement. The research in this paper provides a theoretical basis for further improving the quality defects of the thin-walled injection molded parts.

Optimization of Process Parameters for Thin Plastic Shell Injection Molding Based on Neural Network and Genetic Algorithm

Multi-objective Process Parameter Optimization for Energy Saving in Injection Molding Process

Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network

Injection Molding Process Optimization of Plastic Packaging Device Based on GA and BP Neural Network

Multi-objective Intelligent Optimization of Injection Molding Parameters Based on BP-NSGA

Quality prediction and control of thin-walled shell injection molding based on GWO-PSO, ACO-BP, and NSGA-II

Parameters Optimization of Short Fiber-Reinforced Composites Injection Molding By the Combining Neural Network and Genetic Algorithm

Multi-objective Optimization of Injection Molding Process Based on One-Dimensional Convolutional Neural Network and the Non-dominated Sorting Genetic Algorithm II

Optimization of injection molding process parameters to improve the mechanical performance of polymer product against impact

A Hybrid Back-Propagation Neural Network and Intelligent Algorithm Combined Algorithm for Optimizing Microcellular Foaming Injection Molding Process Parameters

Warpage Optimization of Fiber-Reinforced Composite Injection Molding by Combining Back Propagation Neural Network and Genetic Algorithm

Multi-objective optimization of injection molding process parameters based on BO-RFR and NSGAII methods

Experimental-based Optimization of Polymer Injection Molding Process Parameters Using Anfis-Ga Method

Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods

Mold design and forming process parameters optimization for passenger vehicle front wing plate

Research on Optimization of Injection Molding Process Parameters of Automobile Plastic Front-End Frame

Surrogate Model and Improved Genetic Algorithm-Based Warpage Optimization of Injection Molding

Warpage Optimization in Injection Molding Using MPSO−HNN and MPSO Algorithm

Multi-objective Optimization and Quality Monitoring of Two-piece Injection Molding Products

Optimization of Injection Molding Process of Transparent Complex Multi-Cavity Parts Based on Kriging Model and Various Optimization Techniques

Shrinkage prediction of injection molded high density polyethylene parts with taguchi/artificial neural network hybrid experimental design