A Model-Based Approach to Study the Effect of Temperature in Plant-Wide Biological Wastewater Treatment Plants
Abdul Gaffar Sheik,Murali Mohan Seepana,Seshagiri Rao Ambati
DOI: https://doi.org/10.3103/S1063455X22030110
2022-07-19
Journal of Water Chemistry and Technology
Abstract:The effect of temperature on phosphorous, nitrogen, organic matter removal, overall effluent quality, methane, and hydrogen production in an activated sludge system (ASS) is assessed in this research. For the plant-wide model of the ASS, benchmark simulation model (BSM2-P) with an ASS (ASM2d) is used and the temperature is selected between 10 to 35°C covering different seasons. A steady-state simulation is carried out to evaluate the effluent compositions by changing kinetic parameters. A total of fourteen kinetic expressions for the maximum growth rate of heterotrophic biomass, autotrophic, phosphate accumulating organisms and their decay rates, oxygen saturation, hydrolysis, fermentation and oxygen mass transfer coefficients are also considered. Improved removal efficiency of NH, TN, TP, COD, and BOD 5 is obtained at 17, 20, 10, 20, and 28°C temperatures respectively. The average percentage of removal is obtained as 22.2, 9.7, 28, 1.7, and 86.4% respectively for NH, TN, TP, COD, and BOD5 which is higher when compared to the removal rate at 15°C. Further, the anaerobic digestion model (ADM1) is also used with changing physico-chemical parameters which are functions of temperature. The corresponding physico-chemical parameters are analysed in the range of 25 to 55°C. A total of seven physico-chemical kinetic expressions for the acid-base equilibrium gases are considered which includes Henry's law coefficient for carbon dioxide, methane, hydrogen, and partial pressure of water. At higher temperature (55°C) the ADM1 showed improved production efficiency rates for carbon dioxide and hydrogen but at lower level (25°C) it showed lower production efficiency rates. The average production rates of methane, hydrogen, and CO 2 at 55°C different by –0.01, 54.1, and 7.8% respectively when compared at temperature of 28°C. This knowledge of varying temperature leads to the operator to handle biological treatment for wastewater in a quality manner with an optimal operational cost.
chemistry, physical, applied, analytical