Abstract:This research explored effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures of fly ash (FA) and ground granulated blast furnace slag powder (SL). The two types of C55 strength grade concretes (one is pure cement concrete, another one is concrete, replacing part of cement with 12% FA and 18% SL) were prepared and their compressive strength, chloride diffuse on coefficient and carbonation depth under the standard and steam curing conditions were measured and compared. The phase composition and microstructure of the concretes under the two curing conditions were tested by X-ray diffraction (XRD), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). The results show that, on the one hand, compared with standard curing, steam curing is beneficial to the early strength, but not conducive to the later strength development and chloride permeability resistance of both two types of concretes. Furthermore, for the steam cured concrete, the 28d carbonation depth of the forming surface is higher than that of the bottom surface. What's more, steam curing can reduce the carbonization resistance of pure cement concrete and improve the carbonization resistance of concrete mixed with FA and SL. On the other hand, composite mineral admixtures of FA and SL reduce the early strength, the carbonization resistance of concrete cured with standard curing, but improve the later strength, the carbonization resistance and chloride permeability resistance of concrete cured with steam curing. FA and SL are thermally activated under steam curing and can react with the calcium hydroxide formed by cement hydration in the early stage, which produces larger amount of secondary hydration products to improve the pore structure and interfacial microstructure of the concrete with FA and SL. Thus, the adverse effects of steam curing on later strength and durability of concrete are significantly restrained by composite mineral admixtures of FA and SL.

Experimental Research on the Influence of Curing Condition on the Deformation Property of Concrete

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Influence of Superplasticiser on Early Shrinkage and Total Shrinkage of Concrete

Influence of Early-age Curing Time on Shrinkage of Concrete

The Research of the Effect of Fly Ash on the Shrinkage Property of Commercial Concrete

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Effect of Internal Curing on Moisture Gradient Distribution and Deformation of A Concrete Pavement Slab Containing Pre-Wetted Lightweight Fine Aggregates

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete

Influence of Fly Ash on the Deformation of Shrinkage-compensating Concrete with the Same Level of Strength

Influence of Variable Temperature Curing on Mechanical Properties of Fly Ash Concrete

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Influence Of Curing Time On The Drying Shrinkage Of Concretes With Different Binders And Water-To-Binder Ratios

Effect of Thermal Environment at Early Age on Hydration Phases Composition and Strength Development of Concrete Containing Fly Ash

Experimental Study on the Cracking Resistance at Early Ages of High Performance Concrete Added with Lithium Slag and Fly Ash

Influence of Fly Ash on the Compressive Strength of Concrete under Temperature Match Curing Conditions

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

Effect of Curing Condition on Compressive Properties of Concrete Subjected to Fire

Influence of Early-Age Moist Curing Time on the Late-Age Properties of Concretes with Different Binders

Effects of Mixed with Fly Ash and Slag Powder on Volume Deformation of Cement Mortar Under the Environment of Invariable Temperature and Variable Humidity

Impact of heat curing regime on the compressive strength and drying shrinkage of alkali-activated slag mortar

Restrained Shrinkage of Intermittent Casting Concrete Slab in the Early Age