Abstract:Accurate finite element (FE) models are extremely vital to the analysis of the dynamic characteristics of engineering structures. However, it is challenging for the frequency response function (FRF)-based model updating method to obtain reliable numerical results as the limited number of FRFs at the selected peak positions usually leads to an unacceptable or failure of model updating. Moreover, the increased number of updating coefficients in complex engineering problems generates nonlinear optimization models with the local solutions by traditional optimization techniques. To tackle these two issues, a new model updating method is proposed to make full use of FRFs extracted from measured field data of structures and the improved particle swarm optimization (PSO) technique for accurately estimating physical parameters of structures. The novelties of this research include: (1) The signature assurance criterion (SAC)-based FRF is evaluated to eliminate the influence of limited frequency points on the accuracy of the updated model using the normalized acceleration component; (2) The enhanced (PSO) is developed to realize the adaptive selection of inertia factors for the better diversity by introducing an average value of the fitness function, and then accurate predictions of updating coefficients within a smaller number of iterations are achieved using the developed constraint factor. The effectiveness of the proposed method is verified by mathematical model of a jacket platform. Results show that the proposed method can accurately obtain the updating coefficients under spatial incomplete condition, and the maximum error of natural frequencies is 0.779% using the accelerations containing 5% noise. To prove the robustness of the proposed method, experimental studies of monopile offshore wind turbine are also conducted and the maximum error of natural frequencies is 1.887% under the consideration of spatial incompleteness represented by the structural stiffness degradation. Finally, the feasibility of the proposed method is evaluated by a test of a complex jacket platform, whose variation is simulated by weakening the connections of some elements. The maximum error of natural frequencies predicted by the updated model is only 4.831% as compared with experimental results. Throughout these examples, the extended FRF model updating method provides engineers and designers with a useful insight into the development of reliable techniques to accurately predict dynamic responses of offshore structures.

Aircraft structure FEM model updating and software development based on frequency response function data

Model Updating Applied to an Missile Structure

Comparative Study of Model Updating Methods Using Frequency Response Function Data

A Developed Model Updating Method Based on Extended Frequency Response Functions and Its Application Study of Offshore Structures

Structure Finite Element Model (FEM) Updating Based on Static-load Response Surface Methodology

Theory and Implementation of Finite Element Model Updating of the Structures Based on Time Domain Data

Finite element model updating based on response surface of the truncated singular values of frequency response functions

Research on systemic method of dynamic model updating concerning aerospace structural

Static and dynamic finite element model updating of structures based on response surface method: theory and application

Theoretical research on the energy substructure finite element model updating technology with parametric analysis

Research on computational method of structure steady state response

Research on Finite Element Model Updating Technique Based on Static Strength Test

Finite element model updating of airplane wing based on Gaussian radial basis function response surface

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Finite element model updating based on statistics analysis

Substructure-based model updating using residual flexibility mixed-boundary method

Model Updating of Bridge Structures Based on Different Residuals

The Composite Methods of Updating Finite Element Models

Study on Finite Element Model Updating of Nonlinear Structures Using Neural Network

Finite Element Model Updating Using Response Surface Method

Model Updating for a Satellite Structure Based on Basic Excitation Test Data