Abstract:In this study, the fabrication and characterization of a two-dimension vector bending sensor based on helical long-period gratings (HLPGs) in four core fiber (FCF) are demonstrated. The three outer cores of FCF are distributed at a regular triangle, and one inner core is distributed in the center of the FCF. The HLPGs with the period of 435 μm and period number of 60 were fabricated in FCF by a CO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</inf> laser. Thanks to the special spatial distribution of the cores in FCF, the proposed FCF-HLPGs can achieve vector bending sensing. In the range from 0.7855 m −1 to 1.8157 m −1 , the bending sensing characteristics exhibit different sensitivities in the directions of 0° and 180°. The bending sensitivity of FCF-HLPGs at the direction of 0° and 180° are 7.27 nm/m −1 and -11.39 dB/m −1 , 21.37 nm/m −1 and -3.87 dB/m −1 , respectively. The FCF-HLPGs have a potential application in the field of vector bend sensing.

Highly Sensitive Bend Sensor Based on Bragg Grating in Eccentric Core Polymer Fiber

D-shaped Polymer Optical Fiber Bragg Grating for Bend Sensing

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

Highly Sensitive Bending Sensor Based on a Tapered Hollow Core Microstructured Optical Fiber

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Highly Sensitive Curvature Fiber Sensor Based on an Enhanced Core Diameter Mismatch.

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

In-Fiber Twist Sensor Based on a Fiber Bragg Grating with 81 $^{\circ}$ Tilted Structure

Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Simultaneous measurement of temperature and bend by using an eccentric core fiber Bragg grating cascaded with a Fabry-Perot cavity

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

All-fiber intensity bend sensor based on photonic crystal fiber with asymmetric air-hole structure

Bend Sensors with Direction Recognition Based on Long-Period Gratings Written in D-shaped Fiber

Directional Bending Sensor Based on LP11 Mode from Few-Mode Ring-Core Fiber with Long-Period Grating

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Two-Dimension Vector Bending Sensor Based on Helical Long-Period Gratings in Four-core Fiber

Highly Sensitive Torsion Sensor Based on Triangular-Prism-shaped Long-Period Fiber Gratings

Orientation-discriminating Curvature Sensor Based on a Chirped Fiber Bragg Grating Fabry–Perot Interferometer