Abstract:The ever-increasing demand for oil & gas exploration from land to subsea necessitates using higher-strength and high-ductility heavy-wall thickness pipes, which may increase the microstructural inhomogeneity along the steel plate sections, ultimately impacting the mechanical properties. In this work, the differences in microstructure and mechanical properties between the through-thickness layers of a heavy-wall ferrite/bainite (F/B) dual-phase (DP) X70 pipeline steel plate were studied. The results showed that the size of the ferrite grain and the volume fraction of bainite increased from the surface layer to the mid-thickness layer of the DP X70 pipeline steel plate. The surface and mid-thickness layers had a lower uniform elongation and higher strength and hardness. In comparison, the quarter layer had higher uniform elongation and lower strength and hardness. The refined grain size and the strong {001} texture were responsible for enhanced in strength and hardness. The higher γ-fiber texture at the quarter layer favored the higher plasticity. The analysis results of strain-hardening behaviors based on the modified C-J model showed that the mid-thickness layer had a higher strain-hardening capacity at the beginning of the plastic strain, leading to deformation instability and reduced material plasticity. The surface layer maintained a high hardening exponent even at high plastic strains, which facilitated the deformation properties of the material. The results provide a basis for evaluating the influence of microstructural factors on the strength and plasticity of heavy-wall X70 pipeline steel and the coordination mechanism of micro deformation in DP steels.

Strengthening Mechanism of V-N Microalloyed X60 Pipeline Steel Produced by Compact Strip Production Line

Microstructure Characterization and Strengthening Mechanism Analysis of X100 Pipeline Steel

Microstructure and mechanical properties of X90 high strength pipeline steel

Research of Micro-Alloyed Microstructure and Composition in X80 Pipeline Steel for High Heat Input Welding

Fine-Grained X80 Pipeline Steels Produced by a Novel Ultra Fast Cooling Process

Strengthening and Toughening Mechanism of V-N Microalloying Low Alloy Structural Steel

Microstructure and properties of X100 large-deformability pipeline steel based on heating on-line partitioning

Vanadium Dispersion Strengthening of Low-Carbon Pipe Steels

Coarse Grain Heat Affect Zone Microstructures and Toughness of X80 Pipeline Steel

Microstructure and Properties of Hot Rolled X65 Pipeline Steel Strip Produced by Tangsteel

The Effect of Microstructure on Properties of High Deformation Pipeline Steel X70

Effect of hot rolled process on microstructure and properties of X65 pipeline steel

Microstructural evolution and grain refinement of a high strength low alloy steel produced by compact strip production

The Microstructure and Mechanical Property of X70, X80 and X100 Grade Pipeline Steel

Effect of through-thickness microstructure inhomogeneity on mechanical properties and strain hardening behavior in heavy-wall X70 pipeline steels

V-N microalloying of high strength weathering steel YQ450NQR1

Experiment Study of Microstructure Property and Its Control of Submerged Arc Welding Seam of X80 Pipeline Steels

Relationship Between Microstructure and Mechanical Properties of X100 Pipeline Steel

Relationship between Microstructure and Mechanical Properties of V-N Microalloyed High Strength Ship Plate Steel

Effect of deformation amount distribution in the austenite recrystallization temperature region on the microstructure and mechanical properties of the X70 pipeline steel

Submerged Arc Welding Wire Matched with X80 Pipeline Steel