Abstract:The high precision positioning can be easily achieved by using real-time kinematic (RTK) and precise point positioning (PPP) or their augmented techniques, such as network RTK (NRTK) and PPP-RTK, even if they also have their own shortfalls. A reference station and datalink are required for RTK or NRTK. Though the PPP technique can provide high accuracy position data, it needs an initialisation time of 10-30 min. The time-relative positioning method estimates the difference between positions at two epochs by means of a single receiver, which can overcome these issues within short period to some degree. The positioning error significantly increases for long-period precise positioning as consequence of the variation of various errors in GNSS (Global Navigation Satellite System) measurements over time. Furthermore, the accuracy of traditional time-relative positioning is very sensitive to the initial positioning error. In order to overcome these issues, an improved time-relative positioning algorithm is proposed in this paper. The improved time-relative positioning method employs PPP model to estimate the parameters of current epoch including position vector, float ionosphere-free (IF) ambiguities, so that these estimated float IF ambiguities are used as a constraint of the base epoch. Thus, the position of the base epoch can be estimated by means of a robust Kalman filter, so that the position of the current epoch with reference to the base epoch can be obtained by differencing the position vectors between the base epoch and the current one. The numerical results obtained during static and dynamic tests show that the proposed positioning algorithm can achieve a positioning accuracy of a few centimetres in one hour. As expected, the positioning accuracy is highly improved by combining GPS, BeiDou and Galileo as a consequence of a higher amount of used satellites and a more uniform geometrical distribution of the satellites themselves. Furthermore, the positioning accuracy achieved by using the positioning algorithm here described is not affected by the initial positioning error, because there is no approximation similar to that of the traditional time-relative positioning. The improved time-relative positioning method can be used to provide long-period high precision positioning by using a single dual-frequency (L1/L2) satellite receiver.

The Impact of Reference Station Coordinates Deviation on Precision of DGPS Surveying

Study on Improving GPS Measurement Accuracy

Study on the Application of GPS in the Track Detecting Instrument

Precision Real-Time Orbit Determination Algorithm and Hardware-in-the-Loop Simulation for ZDPS-2 Satellite

Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps

An Online Error Calibration Method for Spaceflight TT&C Systems Based on LEO-ground DDGPS

Combined Adjustment Project of National Astronomical Geodetic Networks and 2000' National GPS Control Network*

Study on the algorithms to correct and compensate for GLONASS signal deviation based on GNSS receiver

Research of influence and correction of GPS antenna phase center deviation on GPS height

Data Processing and Analysis of EGNOS Trial in China Area

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

Accuracy Comparison of Rock Discontinuity Geometric Parameters in Photogrammetry Based on Two Georeferencing Methods: Control Points and Geotagged Photos

Accuracy Research on GPS Point Positioning Using IGS Data Products

An overall adjustment method for relative corrections of master reference stations in the BDS/GNSS network RTK system

Study on Effect of Altitude Error on Position Precision of Double-Star Positioning System

A DYNAMIC PERFORMANCE EVALUATION METHOD FOR DGPS RECEIVERS UNDER LINEAR PARALLEL-TRACKING APPLICATIONS

Data Transformation for Super-Totalstation Positioning System Integrated by GPS and Totalstation

FEASIBILITY VERIFICATION OF VIRTUAL REFERENCE STATION TECHNOLOGY IN GEOLOGICAL HAZARD MONITORING

Investigation of Stability of Precise Geodetic Instruments Used in Deformation Monitoring

Towards Millimeter-Level Accuracy in GNSS-Based Space Geodesy: A Review of Error Budget for GNSS Precise Point Positioning

An Improved Long-Period Precise Time-Relative Positioning Method Based on RTS Data