Abstract:Doppler shift is an essential measurement within a GNSS receiver, which reflects the relative velocity between the transmitter and the receiver. Therefore, the Doppler measurement provides an alternative approach to the Position, Velocity, Timing (PVT) solution, which is commonly termed Doppler positioning. In this way, Doppler positioning can serve as a complement to conventional pseudorange positioning. Besides, Doppler positioning is also an essential component of LEO satellite navigation and anti-spoofing schemes. Therefore, researches for precise, real-time, and wide applicability Doppler positioning algorithms have been gradually attached importance. However, the practicality of existing methods is limited, due to the shortcomings in terms of accuracy performance and real-time use. To this end, a precise real-time Doppler positioning technique is investigated in this paper, using a stand-alone GNSS receiver. Inspired by the superiority of real-time use, modifying the conventional Least Squares (LS) based approach is the basic idea of our work to improve the Doppler positioning performance. Both the position and velocity results can be derived from the LS-based Doppler positioning technique, meanwhile, the velocity solution has much higher accuracy than the position, which will be demonstrated in this paper. Thereby, the improvement on positioning accuracy is achieved by exploiting the velocity result to smooth the original position result, which is directly computed from the LS-based approach. In particular, a Position-Domain (PD) filter is implemented for the fusion of position and velocity. Compared with a Kalman Filter (KF), the PD filter is capable of freeing the user from the inconvenience of selecting an appropriate model and initial value, as the choice of which will dramatically influence the performance of a KF. A basic demonstration of the validity and enhancement of our work is conducted with two field tests. Compared with the LS-based approach, the Root-Mean-Square Error (RMSE) is reduced from 5km to 28.96m in the dynamic scenario, and from 4km to 21.82m in the static scenario.

A DYNAMIC PERFORMANCE EVALUATION METHOD FOR DGPS RECEIVERS UNDER LINEAR PARALLEL-TRACKING APPLICATIONS

Study on Improving GPS Measurement Accuracy

Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps

Performance Analysis of Relative GPS Positioning for Low-Cost Receiver-Equipped Agricultural Rovers

A Trajectory Similarity-Based Method to Evaluate GNSS Kinematic Precise Positioning Performance with a Case Study

Implementation and Performance Assessment of A Vector Tracking Method Based on A Software Gps Receiver

Assessment of the Real-Time and Rapid Precise Point Positioning Performance Using Geodetic and Low-Cost GNSS Receivers

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

GPS accuracy analysis and the study of accuracy improving method

Carrier Phase-Based Precise Heading and Pitch Estimation Using a Low-Cost GNSS Receiver

A Method of Improving Performance of Measurement Accuracy for GNSS Receiver under Dynamic Scenarios

Precise Real-Time Doppler Positioning Using a Stand-Alone GNSS Receiver

Low-Cost Single-Frequency DGNSS/DBA Combined Positioning Research and Performance Evaluation

Using PPP Information to Implement a Global Real-Time Virtual Network DGNSS Approach

Laser radar based dynamic performance evaluation of RTK-GPS

Cooperative D-GNSS Aided with Multi Attribute Decision Making Module: A Rigorous Comparative Analysis

Feasibility Analysis of the Performance of Low-Cost Gnss Receivers in Monitoring Dynamic Motion

Performance Analysis of BDS/GPS Kinematic Vehicle Positioning in Various Observation Conditions

Positioning Accuracy Comparison of GNSS Receivers Used for Mapping and Guidance of Agricultural Machines

An Effective Approach to Improving Low-Cost GPS Positioning Accuracy in Real-Time Navigation

Data Processing and Analysis of EGNOS Trial in China Area